Cisco Systems A9014CFD manual 11-10

Chapter 11 ITU-T Y.1731 Performance Monitoring

How to Configure ITU-T Y.1731 Performance Monitoring

5.ethernet y1731 loss SLM domain domain-name{evc evc-idvlan vlan-id} {mpid target-mp-idmac-address target-address}cos cos {source {mpid source-mp-idmac-address source-address}}

6.aggregate interval seconds

7.availability algorithm {sliding-window static-window}

8.frame consecutive value

9.frame interval milliseconds

10.frame size bytes

11.history interval intervals-stored

12.owner owner-id

13.exit

14.exit

15.ip sla reaction-configuration operation-number[react {unavailableDS unavailableSD loss-ratioDS loss-ratioSD}][threshold-type {average [number-of-measurements] consecutive [occurrences] immediate}] [threshold-value upper-thresholdlower-threshold]

16.ip sla logging traps

17.exit

DETAILED STEPS

	Command	Purpose
Step 1
	enable	Enables privileged EXEC mode.
		• Enter your password if prompted.
	Example:
	Router> enable
Step 2
	configure terminal	Enters global configuration mode.
	Example:
	Router# configure terminal
Step 3
	[no] asr901-platf-multi-nni-cfm	Enables Multi-NNI CFM configuration on the Cisco
		ASR 901 router. The no form of this command
	Example:	enables the SLM over cross connect EVC
		configuration. The default option enables multi-NNI
	Router# asr901-platf-multi-nni-cfm
		CFM configuration.
Step 4
	ip sla operation-number	Configures an IP SLA operation and enters IP SLA
		configuration mode.
	Example:	• operation-number—Identifies the IP SLAs
	Router(config)# ip sla 11	operation you want to configure.

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
11-10	OL-23826-09