Cisco Systems A9014CFD manual Configuring CFM over EFP with Cross Connect, 10-19

Chapter 10 Configuring Ethernet OAM

	Command	Purpose
Step 8
	threshold milliseconds	(Optional) Specify the upper threshold value in
		milliseconds for calculating network monitoring statistics.
		The range is 0 to 2147483647; the default is 5000.
Step 9
	timeout milliseconds	(Optional) Specify the amount of time in milliseconds that
		the IP SLA operation waits for a response from its request
		packet. The range is 0 to 604800000; the default value is
		5000.
Step 10
	exit	Return to global configuration mode.
Step 11
	ip sla schedule operation-number [ageout seconds]	Schedule the time parameters for the IP SLA operation.
	[life {forever seconds}] [recurring] [start-time	• operation-number—Enter the IP SLA operation
	{hh:mm {:ss} [month day day month] pending
		number.
	now after hh:mm:ss}]
		• (Optional) ageout seconds—Enter the number of
		seconds to keep the operation in memory when it is not
		actively collecting information. The range is 0 to
		2073600 seconds. The default is 0 seconds.
		• (Optional) life—Set the operation to run indefinitely
		(forever) or for a specific number of seconds. The
		range is from 0 to 2147483647. The default is 3600
		seconds (1 hour)
		• (Optional) recurring—Set the probe to be
		automatically scheduled every day.
		• (Optional) start-time—Enter the time for the
		operation to begin collecting information:
		– To start at a specific time, enter the hour, minute,
		second (in 24-hour notation), and day of the
		month.
		– Enter pending to select no information collection
		until a start time is selected.
		– Enter now to start the operation immediately.
		– Enter after hh:mm:ss to show that the operation
		should start after the entered time has elapsed.
Step 12
	end	Return to privileged EXEC mode.
Step 13
	show ip sla configuration [operation-number]	Show the configured IP SLA operation.
Step 14
	copy running-config startup-config	(Optional) Save your entries in the configuration file.

To remove an IP SLA operation, enter the no ip sla operation-numberglobal configuration command.

Configuring CFM over EFP with Cross Connect

The CFM over EFP Interface with cross connect feature allows you to:

•Forward continuity check messages (CCM) towards the core over cross connect pseudowires. To know more about pseudowires, see

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09		10-19