Cisco Systems A9014CFD manual Attaching the Policy-map to Mlppp Interface, 24-70

Chapter 24 Configuring QoS

Extending QoS for MLPPP

	Command	Purpose
Step 16
	queue queue-limit-size packets	Configures the queue limit (size) for a class in packets.
		• number—The maximum size of the queue.
	Example:	• packets—Indicates that the unit of measure is packets.
	Router(config-pmap-c)# queue-limit
		Note To configure queue-limit, you should configure either priority
	80 packets
		percent or bandwidth percent.
Step 17
	end	Exits QoS policy-map class configuration mode.
	Example:
	Router(config-pmap-c)# exit

Attaching the Policy-map to MLPPP Interface

Complete the following steps to attach the policy-map to an MLPPP interface.

SUMMARY STEPS

1.enable

2.configure terminal

3.interface multilink group-number

4.ip address address [subnet mask]

5.load-interval interval

6.mpls ip

7.keepalive period

8.ppp multilink

9.ppp multilink group number

10.ppp multilink endpoint string char-string

11.service-policy output policy-map-name

12.exit

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
24-70	OL-23826-09