Cisco Systems A9014CFD manual Microwave ACM Signaling and EEM Integration, 31-1

C H A P T E R 31

Microwave ACM Signaling and EEM Integration

This feature module describes the Microwave Adaptive Code Modulation (ACM) Signaling and Embedded Event Manager (EEM) integration, which enables the microwave radio transceivers to report link bandwidth information to an upstream Ethernet switch and take action on the signal degradation to provide optimal bandwidth.

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the “Feature Information for Microwave ACM Signaling and EEM Integration” section on page 31-17.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.

Contents

•Prerequisites, page 31-2

•Feature Overview, page 31-2

•How to Configure Microwave ACM Signaling and EEM Integration, page 31-4

•Configuration Examples for Microwave ACM Signaling and EEM Integration, page 31-11

•Additional References, page 31-16

•Feature Information for Microwave ACM Signaling and EEM Integration, page 31-17

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09		31-1