Cisco Systems A9014CFD manual Manually Configuring an IP SLA CFM Probe or Jitter Operation

Contents

Verifying the LACP Transmit Rate 9-8

Configuring EtherChannel Load Balancing 9-8

Modifying MTU Size on Port-Channel9-9

	Restrictions	9-9
	Verifying the MTU Size on Port-Channel					9-9
	EVC On Port-Channel	9-10
	Restrictions for EVC EtherChannel				9-10
	Configuring EVC on Port-Channel				9-11
	Verifying the Configuration				9-11
	Troubleshooting		9-12
	Configuring Ethernet OAM
C H A P T E R 10			10-1
	Contents 10-1
	Understanding Ethernet CFM			10-2
	IP SLA Support for CFM			10-2
	Configuring Ethernet CFM 10-2
	Default Ethernet CFM Configuration 10-3
	Ethernet CFM Configuration Restrictions and Guidelines 10-3
	Configuring the CFM Domain				10-3
	Configuring Multi-UNI CFM MEPs in the Same VPN 10-7
	Configuring Ethernet CFM Crosscheck					10-12
	Configuring Static Remote MEP 10-13
	Configuring a Port MEP			10-14
	Configuring SNMP Traps			10-15

Configuring IP SLA CFM Operation		10-16
Manually Configuring an IP SLA CFM Probe or Jitter Operation 10-16
Configuring CFM over EFP with Cross Connect			10-19
Configuring CFM over EFP Interface with Cross Connect 10-20
Configuring CFM over EFP Interface with Cross Connect—PortChannel-Based Cross Connect
Tunnel 10-22
Configuring CFM with EVC Default Encapsulation				10-24
Verifying CFM with EVC Default Encapsulation			10-25
Example: Configuring CFM with EVC Default Encapsulation 10-26
Configuring Y.1731 Fault Management		10-26
Default Y.1731 Configuration 10-26
Configuring ETH-AIS	10-27
Configuring ETH-LCK	10-28
Managing and Displaying Ethernet CFM Information				10-30
Understanding the Ethernet OAM Protocol 10-32
OAM Features 10-33
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09					ix