Cisco Systems A9014CFD manual Configuring EEP Applet Using CLIs, 31-7

Chapter 31 Microwave ACM Signaling and EEM Integration

How to Configure Microwave ACM Signaling and EEM Integration

Configuring EEP Applet Using CLIs

To configure EEP applet, complete the following steps:

Prerequisites

•One switch virtual interface (SVI) or bridge domain is required per physical link.

•One EEM script is required per physical link.

Note The EEM script configures the metric on the microwave link and adjusts the QoS policy based on the Ethernet event parameters. You can download the scripts from the following location:

SUMMARY STEPS

1.enable

2.configure terminal

3.event manager applet applet-name

4.event tag event-tagethernet microwave clear-sd {interface type number}

5.event tag event-tagethernet microwave sd {interface type number} threshold mbps

6.action action-id set variable-name variable-value

7.action action-id cli command cli-string

8.action action-id cli command cli-string

9.exit

DETAILED STEPS

	Command	Purpose
Step 1	enable	Enables privileged EXEC mode.
		• Enter your password if prompted.
	Example:
	Router> enable
Step 2	configure terminal	Enters global configuration mode.
	Example:
	Router# configure terminal
Step 3	event manager applet applet-name	Registers an applet with the Embedded Event Manager (EEM) and
		enters applet configuration mode.
	Example:	• applet-name—Name of the applet file.
	Router(config)# event manager applet
	ACM61

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09		31-7