Cisco Systems A9014CFD Example: Zero-touch Deployment

4-16
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09
Chapter 4 Managing and Monitoring Network Management Features
Where to Go Next
Example: Zero-touch Deployment
The following configuration example sets the Cisco ASR 901 to boot using configurations stored on a
CNS–CE server with the IP address 30.30.1.20.
Note This section provides partial configurations intended to demonstrate a specific feature.
hostname 901
!
cns trusted-server all-agents 30.30.1.20
cns event 30.30.1.20 11011 keepalive 60 3
cns config initial 30.30.1.20 80
cns config partial 30.30.1.20 80
cns id hostname
cns id hostname event
cns id hostname image
!
end
Where to Go Next
For additional information on monitoring and managing the ASR 901 router, see the documentation
listed in the “Related Documents” section on page 4-16.
Additional References
Related Documents
Standards
Related Topic Document Title
Cisco IOS commands Cisco IOS Master Commands List, All Releases
ASR 901 Command Reference Cisco ASR 901 Series Aggregation Services Router Command
Reference
Cisco IOS Interface and Hardware Component
Commands
Cisco IOS Interface and Hardware Component Command Reference
Standard Title
None —