Cisco Systems A9014CFD Optional Set the rate at which the IP SLA operation, Is 60 seconds, Number

Chapter 10 Configuring Ethernet OAM

	Command	Purpose
Step 4
	cos cos-value	(Optional) Set a class of service value for the operation.
Step 5
	frequency seconds	(Optional) Set the rate at which the IP SLA operation
		repeats. The range is from 1 to 604800 seconds; the default
		is 60 seconds.
Step 6
	history history-parameter	(Optional) Specify parameters for gathering statistical
		history information for the IP SLA operation.
Step 7
	owner owner-id	(Optional) Configure the SNMP owner of the IP SLA
		operation.
Step 8
	request-data-size bytes	(Optional) Specify the protocol data size for an IP SLA
		request packet. The range is from 0 to the maximum size
		allowed by the protocol being used; the default is 66 bytes.
Step 9
	tag text	(Optional) Create a user-specified identifier for an IP SLA
		operation.
Step 10
	threshold milliseconds	(Optional) Specify the upper threshold value in
		milliseconds (ms0 for calculating network monitoring
		statistics. The range is 0 to 2147483647; the default is
		5000.
Step 11
	timeout milliseconds	(Optional) Specify the amount of time in ms that the IP
		SLA operation waits for a response from its request packet.
		The range is 0 to 604800000; the default value is 5000.
Step 12
	exit	Return to global configuration mode.
Step 13
	ip sla schedule operation-number [ageout seconds]	Schedule the time parameters for the IP SLA operation.
	[life {forever seconds}] [recurring] [start-time	• operation-number—Enter the IP SLA operation
	{hh:mm {:ss} [month day day month] pending
		number.
	now after hh:mm:ss}]
		• (Optional) ageout seconds—Enter the number of
		seconds to keep the operation in memory when it is not
		actively collecting information. The range is 0 to
		2073600 seconds. The default is 0 seconds.
		• (Optional) life—Set the operation to run indefinitely
		(forever) or for a specific number of seconds. The
		range is from 0 to 2147483647. The default is 3600
		seconds (1 hour)
		• (Optional) recurring—Set the probe to be
		automatically scheduled every day.
		• (Optional) start-time—Enter the time for the
		operation to begin collecting information:
		– To start at a specific time, enter the hour, minute,
		second (in 24-hour notation), and day of the
		month.
		– Enter pending to select no information collection
		until a start time is selected.
		– Enter now to start the operation immediately.
		– Enter after hh:mm:ss to show that the operation
		should start after the entered time has elapsed.
	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09			10-17