Cisco Systems A9014CFD manual Restrictions

Contents

			Setting Up and Configuring Ethernet OAM						10-35
			Default Ethernet OAM Configuration						10-36
			Restrictions and Guidelines				10-36
			Enabling Ethernet OAM on an Interface						10-36
			Enabling Ethernet OAM Remote Loopback							10-38
			Configuring Ethernet OAM Link Monitoring							10-38
			Configuring Ethernet OAM Remote Failure Indications 10-41
			Configuring Ethernet OAM Templates						10-42
			Displaying Ethernet OAM Protocol Information								10-45
			Verifying Ethernet OAM Configuration						10-46
			Understanding E-LMI	10-48
			Restrictions 10-49
			Configuring E-LMI	10-49
			Default E-LMI Configuration				10-49
			Enabling E-LMI10-50
			Displaying E-LMI Information			10-51
			Understanding Ethernet Loopback			10-51
			Configuring Ethernet Loopback				10-51
			Restrictions	10-52
			Enabling Ethernet Loopback				10-52
			Configuration Example			10-54
			Configuring Y.1564 to Generate Ethernet Traffic							10-56
			Configuring IP SLA for Traffic Generation							10-58
			Configuration Examples			10-60
			ITU-T Y.1731 Performance Monitoring
C H A P T E R 11							11-1
			Finding Feature Information		11-1
			Contents 11-1
			Prerequisites for ITU-T Y.1731 Performance Monitoring								11-1
			Restrictions for ITU-T Y.1731 Performance Monitoring								11-2
			Information About ITU-T Y.1731 Performance Monitoring								11-2
			Frame Delay and Frame-Delay Variation					11-3
			Frame Loss Ratio	11-4
			On-Demand and Concurrent Operations					11-4
			Supported interfaces		11-5
			Benefits of ITU-T Y.1731 Performance Monitoring								11-5
			How to Configure ITU-T Y.1731 Performance Monitoring								11-5
			Configuring Two-Way Delay Measurement						11-6
			Configuring Single-Ended Synthetic Loss Measurement 11-9
		Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
	x										OL-23826-09