Cisco Systems A9014CFD manual How to Configure Dhcp Client on SVI, Configuring Dhcp Client on SVI

Chapter 8 Configuring Ethernet Virtual Connections

Configuring Other Features on EFPs

How to Configure DHCP Client on SVI

This section contains the following topics:

•Configuring DHCP Client on SVI

•Verifying DHCP Client on SVI

•Configuration Example for DHCP Client on SVI

Configuring DHCP Client on SVI

To configure the DHCP client, the IP address, mask, broadcast address, and default gateway address of the SVI are retrieved from the server.

Complete the following steps to configure the DHCP client on SVI.

SUMMARY STEPS

1.enable

2.configure terminal

3.interface vlan vlan-id

4.ip address dhcp

5.interface type-number

6.service instance instance-idethernet encapsulation dotlq vlan-id

7.rewrite ingress tag pop [12] symmetric

8.bridge-domain bridge-id

9.end

DETAILED STEPS

	Command or Action	Purpose
Step 1
	enable	Enables privileged EXEC mode.
		• Enter your password if prompted.
	Example:
	Router> enable
Step 2
	configure terminal	Enters global configuration mode.
	Example:
	Router# configure terminal
Step 3
	interface vlan vlan-id	Configures the VLAN interface and enters interface
		configuration mode.
	Example:
	Router(config)# interface vlan 15

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09		8-25