Cisco Systems A9014CFD Owner-id-Specified the name of the Snmp, Enters IP SLA configuration mode

Chapter 11 ITU-T Y.1731 Performance Monitoring

How to Configure ITU-T Y.1731 Performance Monitoring

	Command	Purpose
Step 9
	frame interval milliseconds	(Optional) Sets the gap between successive frames.
		• milliseconds—Specifies the length of time in
	Example:	milliseconds (ms) between successive synthetic
	Router(config-sla-y1731-loss)# frame interval 100	frames. The range is from 100 to 10000. The
		default is 1000.
Step 10
	frame size bytes	(Optional) Configures padding size for frames.
		• bytes—Specifies the padding size, in four-octet
	Example:	increments, for the synthetic frames. The range is
	Router(config-sla-y1731-loss)# frame size 32	from 64 to 384. The default is 64.
Step 11
	history interval intervals-stored	(Optional) Sets the number of statistics distributions
		kept during the lifetime of an IP SLAs Ethernet
	Example:	operation.
	Router(config-sla-y1731-loss)# history interval 2	• intervals-stored—Specifies the number of
		statistics distributions. The range is from 1 to 10.
		The default is 2.
Step 12
	owner owner-id	(Optional) Configures the owner of an IP SLAs
		operation.
	Example:	• owner-id—Specified the name of the SNMP
	Router(config-sla-y1731-loss)# owner admin	owner. The value is from 0 to 255 ASCII
		characters.
Step 13
	exit	Exits IP SLA Y.1731 loss configuration mode and
		enters IP SLA configuration mode.
	Example:
	Router(config-sla-y1731-loss)# exit
Step 14
	exit	Exits IP SLA configuration mode and enters global
		configuration mode.
	Example:
	Router(config-ip-sla)# exit

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
11-12	OL-23826-09