Cisco Systems A9014CFD manual Configuration Parameters, 23-2

Chapter 23 Cisco IOS IP SLA

Configuring IPSLA Path Discovery

SUMMARY STEPS

1.enable

2.configure terminal

3.mpls discovery vpn next-hop

4.mpls discovery vpn interval seconds

5.auto ip sla mpls-lsp-monitor operation-number

6.type echo ipsla-vrf-all

	Command	Purpose
Step 1
	enable	Enables privileged EXEC mode.
		• Enter your password if prompted.
	Example:
	Router> enable
Step 2
	configure terminal	Enters global configuration mode.
	Example:
	Router# configure terminal
Step 3
	mpls discovery vpn next-hop	(Optional) Enables the MPLS VPN next hop neighbor discovery process.
		Note This command is automatically enabled when the auto ip sla
	Example:	mpls-lsp-monitor command is entered.
	Router(config)# mpls discovery vpn
	next-hop
Step 4
	mpls discovery vpn interval seconds	(Optional) Specifies the time interval at which routing entries that are no
		longer valid are removed from the next hop neighbor discovery database
	Example:	of an MPLS VPN.
	Router(config)# mpls discovery vpn
	interval 120
Step 5
	auto ip sla mpls-lsp-monitor	Begins configuration for an LSP Health Monitor operation and enters auto
	operation-number	IP SLA MPLS configuration mode.
	Example:
	Router(config)# auto ip sla
	mpls-lsp-monitor 1
	Router(config-auto-ip-sla-mpls)#
Step 6
	type echo ipsla-vrf-all	Enters MPLS parameters configuration submode and allows the user to
		configure the parameters for an IP SLAs LSP ping operation using the
	Example:	LSP Health Monitor.
	Router(config-auto-ip-sla-mpls)#	For details on the parameters, see Configuration Parameters, page 23-2.
	type echo ipsla-vrf-all
	Router(config-auto-ip-sla-mpls-para
	ms)#

Configuration Parameters

Router(config)#auto ip sla mpls-lsp-monitor 1

Router(config-auto-ip-sla-mpls)#?

Auto IP SLAs MPLS LSP Monitor entry configuration commands: exit Exit IP SLAs MPLSLM configuration

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
23-2	OL-23826-09