Cisco Systems A9014CFD Configuration Examples for Vrrp, Example Configuring a Vrrp Master Router

Chapter 27 Hot Standby Router Protocol and Virtual Router Redundancy Protocol

Configuration Examples for VRRP

	Command or Action	Purpose
Step 9
	vrrp [group-number]track object-number	Configures VRRP to track an object and change the Hot
	[decrement priority-decrement]	Standby priority on the basis of the state of the object.
	Example:
	Router(config-if)# vrrp 2 track 1 decrement 20
Step 10
	end	Returns to privileged EXEC mode.
	Example:
	Router(config-if)# end

Configuration Examples for VRRP

This section provides the following configuration examples:

• Example: Configuring a VRRP Master Router

• Example: Configuring a VRRP Backup Router

• Example: VRRP Text Authentication

Example: Configuring a VRRP Master Router

This example shows how to configure a VRRP Master router.

Router# configure terminal

Router(config)# interface GigabitEthernet0/1

Router(config-if)#service instance 1 ethernet

Router(config-if-srv)# encapsulation dot1q 10

Router(config-if-srv)#rewrite ingress tag pop 1 symmetric

Router(config-if-srv)# bridge-domain 10

Router(config-if-srv)# end

Router# configure terminal

Router(config)# interface Vlan10

Router(config-if)#ip address 10.10.10.25 255.255.255.0

Router(config-if)#vrrp 2 ip 10.10.10.30

Router(config-if)#vrrp 2 timers advertise 2

Router(config-if)#vrrp 2 preempt delay minimum 10

Router(config-if)# vrrp 2 priority 110

Router(config-if)#vrrp 2 authentication text cisco7

Router(config-if)#vrrp 2 track 1 decrement 20

Router(config-if)# end

Example: Configuring a VRRP Backup Router

	Router# configure terminal
	Router(config)# interface GigabitEthernet0/1
	Router(config-if)#service instance 1 ethernet
	Router(config-if-srv)# encapsulation dot1q 10
	Router(config-if-srv)#rewrite ingress tag pop 1 symmetric
	Router(config-if-srv)# bridge-domain 10
	Router(config-if-srv)# end
	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
27-8	OL-23826-09