Cisco Systems A9014CFD Creating a Policy-map for SVI Interface, Map from from-value to to-value

Chapter 36 Configuring Inverse Muliplexing over ATM

Configuring Marking MPLS Experimental Bits

4.map from from-value to to-value

5.default copy

DETAILED STEPS

	Command	Purpose
Step 1	enable	Enables privileged EXEC mode.
		• Enter your password if prompted.
	Example:
	Router> enable
Step 2	configure terminal	Enters the global configuration mode.
	Example:
	Router# configure terminal
Step 3	table-map table-name	Creates a table map with the specified name.
	Example:
	Router(config)# table-map
	qos_exp_table
Step 4	map from from-value to to-value	Maps the values associated with the policy map.
	Example:
	Router(config-if)# map from 1 to 2

Creating a Policy-map for SVI Interface

To create a policy-map, complete the following steps:

SUMMARY STEPS

1.enable

2.configure terminal

3.policy-map map-name

4.class class-name

5.set mpls experimental topmost qos-group table table-map-name

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
36-22	OL-23826-09