Cisco Systems A9014CFD Implementing QoS for IPv6, Verifying IPv6 Addressing Routing, Exec mode

Chapter 32 IPv6 Support on the Cisco ASR 901 Router

How to Configure IPv6 Support on the Cisco ASR 901 Router

	Command or Action	Purpose
Step 5 exit		Exits global configuration mode and enters privileged
		EXEC mode.
	Example:
	Router(config-router)# exit

Implementing QoS for IPv6

The QoS implementation for IPv6 environment in the Cisco ASR router is the same as that of IPv4. For configuration information on Configuring QoS on the Cisco ASR 901 router, refer the following link:

http://www.cisco.com/en/US/docs/wireless/asr_901/Configuration/Guide/qos.html

For additional information on Implementing QoS for IPv6, refer the following link:

http://www.cisco.com/en/US/docs/ios-xml/ios/ipv6/configuration/15-2mt/ip6-qos.html

Verifying the Configuration of IPv6 Support on the Cisco ASR 901 Router

This section describes how to use the show commands to verify the configuration and operation of the IPv6 Support feature on the Cisco ASR 901 router, and it contains the following topics:

•Verifying IPv6 Addressing Routing, page 32-27

•Verifying a Static IPv6 Route, page 32-28

•Verifying a Stateless Auto-Configuration, page 32-29

•Verifying IPv6 Implementation on VLAN Interfaces, page 32-29

•Verifying IPv6 Implementation on Loopback Interfaces, page 32-30

•Verifying ICMPv6 Configuration, page 32-30

•Verifying IPv6 Duplicate Address Detection Configuration, page 32-32

•Verifying IPv6 Neighbor Discovery Configuration, page 32-33

•Verifying IPv6 and IPv4 Dual-Stack Configuration, page 32-33

•Verifying OSPFv3 for IPv6 Configuration, page 32-34

•Verifying IS-IS for IPv6 Configuration, page 32-35

•Verifying Multiprotocol-BGP for IPv6 Configuration, page 32-35

•Verifying BFD for IPv6 Configuration, page 32-37

•Verifying BFDv6 and OSPFv3 Configuration, page 32-38

•Verifying BFDv6 for BGP Configuration, page 32-39

Verifying IPv6 Addressing Routing

To verify the IPv6 Addressing Routing information, use the show ipv6 interface command in privileged EXEC mode, as shown in the example.

Router# show ipv6 interface

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09		32-27