Heath Zenith 9700LeD Operation, MANUAL override MODE, Specifications, Mode Switching Summary

OPERATION

Mode:	On-Time	Works: Day	Night
Test	5 Seconds	x	x
Security	1, 5 or 10 Minutes		x
Manual	Until Dawn*		x
Override

* resets to Security mode at dawn.

Note: When first turned on wait about 1 1/2 minutes for the circuitry to calibrate.

MANUAL override MODE

SPECIFICATIONS

Range	Upto70ft.(21m)[varieswith
	surrounding temperature].
Sensing Angle	Up to 180°
Electrical Load	Up to 300 Watt Maximum
	Incandescent [Up to 150
	Watt maximum each lamp
	holder] or 10Watt Maximum
	LED (Up to 5Watt Maximum
	each lamp holder).
Bulb Type	Up to 150 Watt Maximum
	P A R 3 8 T u n g s t e n
	Incandescent or 5Watt LED
	model 2003LEDP38-65K.
Power Requirements ....	120 VAC, 60 Hz

Manual Override mode can only be activated at night when the ON-TIME switch is set to the 1, 5, or 10 minute position.

Flip the light switch off for one sec- ond then back on to change from SECURITY mode to MANUAL OVERRIDE mode.

To return to SECURITY mode, either:

•turn the light off for one minute then turn it on, or...

•daylight will automatically reset the light to SECURITY mode.

1 Second OFF

then...

... back on.

Operating Modes	TEST, SECURITY, and
	MANUAL OVERRIDE
ON-Timer	1, 5, 10 minutes
Test Timer	5 Seconds
Manual
Override Timer	Until Dawn
Range	Adjustable

Mode Switching Summary

		TEST	ON-TIME Switch at 1, 5, or
			10 minutes
	SECURITY
		AUTO
	MODE			Flip light switch off
				for one second then
MANUAL MODE				back on*

*If you get confused while switching modes, turn the power off for one minute, then back on. After the calibration time the control will be in the SECURITY mode.

4 598-1360-00