Cisco Systems A9014CFD manual Configuring Multiprotocol Label Switching, 14-1

C H A P T E R 14

Configuring Multiprotocol Label Switching

Several technologies such as pseudowires utilize MPLS for packet transport. For more information about how to configure MPLS, see the MPLS Configuration Guide, Cisco IOS Release 15.1S.

Note The Cisco ASR 901 router does not necessarily support all of the commands listed in the Release 15.1(2)S documentation.

Note In Cisco ASR 901, mpls ip is configured on SVI only. The Cisco ASR 901 router supports only a maximum of 60 MPLS enabled SVI interfaces.

Note If port channel is configured on an MPLS core, the encapsulation ID should be the same as the bridge domain.

Note The maximum number of LDP labels supported in Cisco ASR 901 router is 4000.

Note MPLS byte switched counters are not supported on Cisco ASR 901 router.

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09		14-1