Cisco Systems A9014CFD manual 42-18, Router# show ipv6 pim traffic

Chapter 42 IPv6 Multicast

Configuring IPv6 Multicast

Tunnel1*

Type	:	PIM Encap
RP	:	4::4
Source:		300::1

To display information about the PIM traffic counters, use the show command described in the following example.

Router# show ipv6 pim traffic

PIM Traffic Counters

Elapsed time since counters cleared: 04:31:40

Received Sent

Valid PIM Packets 1259 1637

Hello 717 2185

Join-Prune 542 0

Register 0 0

Register Stop 0 0

Assert 0 0

Bidir DF Election 0 0

Errors:

Malformed Packets 0

Bad Checksums 0

Send Errors 0

Packet Sent on Loopback Errors 548

Packets Received on PIM-disabled Interface 0

Packets Received with Unknown PIM Version 0

To display the average Join/Prune aggregation for the last (1000/10000/50000) packets for each interface, use the show command described in the following example.

Router# show ipv6 pim join-prune statistic

PIM Average Join/Prune Aggregation			for last		(1K/10K/50K) packets
Interface	MTU	Transmitted				Received
Null0	1500	0	/ 0	/	0	0	/ 0	/ 0
GigabitEthernet0/9	1280	0	/ 0	/	0	0	/ 0	/ 0
Gi0/10	1280	0	/ 0	/	0	0	/ 0	/ 0
Gi0/11	1280	0	/ 0	/	0	0	/ 0	/ 0
GigabitEthernet0/0	1280	0	/ 0	/	0	0	/ 0	/ 0
GigabitEthernet0/1	1280	0	/ 0	/	0	0	/ 0	/ 0
GigabitEthernet0/2	1280	0	/ 0	/	0	0	/ 0	/ 0
GigabitEthernet0/3	1280	0	/ 0	/	0	0	/ 0	/ 0
GigabitEthernet0/4	1280	0	/ 0	/	0	0	/ 0	/ 0
GigabitEthernet0/5	1280	0	/ 0	/	0	0	/ 0	/ 0
GigabitEthernet0/6	1280	0	/ 0	/	0	0	/ 0	/ 0
GigabitEthernet0/7	1280	0	/ 0	/	0	0	/ 0	/ 0
Vlan1	1280	0	/ 0	/	0	0	/ 0	/ 0
Loopback0	1514	0	/ 0	/	0	0	/ 0	/ 0
Port-channel2	1280	0	/ 0	/	0	0	/ 0	/ 0
Vlan10	1476	18	/ 18	/	0	18	/ 0	/ 0
Vlan20	1500	0	/ 0	/	0	0	/ 0	/ 0
Vlan30	1476	27	/ 0	/	0	19	/ 22	/ 0
Vlan100	1500	0	/ 0	/	0	0	/ 0	/ 0
Vlan300	1500	0	/ 0	/	0	0	/ 0	/ 0
Tunnel0	1452	0	/ 0	/	0	0	/ 0	/ 0
Tunnel1	1452	0	/ 0	/	0	0	/ 0	/ 0

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
42-18	OL-23826-09