Cisco Systems A9014CFD manual Configuring Unspecified Bit Rate, Xxix

Contents

	Configuring an N-to-1 vPC Cell Mode						36-8
	ATM AAL5 SDU VCC Transport					36-9
	Verifying IMA Configurations				36-10
	How to Configure ATM Class of Service					36-11
	Configuring Constant Bit Rate				36-11
	Configuring Unspecified Bit Rate 36-12
	Configuring Unspecified Bit Rate Plus					36-13
	Configuring Variable Bit Rate for Real/Non-Real Time Traffic 36-14
	Configuration Examples			36-15
	Example: Creating an IMA Interface						36-15
	Example: Configuring a Port Mode Pseudowire							36-15
	Example: Configuring an N-to-1 VCC Cell Mode							36-16
	Example: Configuring an N-to-1 VPC Cell Mode							36-16
	Example: Configuring CBR				36-16
	Example: Configuring UBR				36-16
	Example: Configuring UBR Plus					36-17
	Example: Configuring VBR for Real Time Traffic							36-17
	Example: Configuring VBR for Non-Real Time Traffic								36-17
	Configuring Marking MPLS Experimental Bits						36-17
	Creating a Policy-map for PVP/PVC/ATM IMA Interface								36-17
	Applying the Policy-map			36-18
	Applying a Policy map on PVC and PVP						36-18
	Applying a Policy map on ATM IMA Interface							36-20
	Creating a Table-map			36-21
	Creating a Policy-map for SVI Interface 36-22
	Applying a Service Policy on SVI Interface						36-23
	Additional References		36-25
	Related Documents		36-25
	Standards 36-25
	MIBs	36-25
	RFCs	36-25
	Technical Assistance			36-25
	Feature Information for Inverse Multiplexing over ATM							36-26
	IPv6 over MPLS: 6PE and 6VPE 37-1
C H A P T E R 37
	Finding Feature Information			37-1
	Contents	37-1

Prerequisites	37-2
Restrictions	37-2
	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09		xxix