Cisco Systems A9014CFD manual 42-14, Router# show ipv6 mld interface gigabitethernet 0/1

Chapter 42 IPv6 Multicast

Configuring IPv6 Multicast

To display the MLD interface specific parameters, use the show command described in the following example.

Router# show ipv6 mld interface gigabitethernet 0/1

FastEthernet4/10 is up, line protocol is up

Internet address is FE80::204:6DFF:FE87:6400/10

MLD is enabled on interface

Current MLD version is 2

MLD query interval is 125 seconds

MLD querier timeout is 60 seconds

MLD max query response time is 10 seconds

Last member query response interval is 1 seconds

Inbound MLD access group is:

MLD activity: 6 joins, 0 leaves

MLD querying router is FE80::1:1:3

To display the MLD traffic counters, use the show command described in the following example.

Router# show ipv6 mld traffic

MLD Traffic Counters

Elapsed time since counters cleared: 04:27:23

Received Sent

Valid MLD Packets 1634 1469

Queries 269 654

Reports 548 815

Leaves 0 0

Mtrace packets 0 0

Errors:

Malformed Packets 0

Bad Checksums 0

Martian source 0

Packets Received on MLD-disabled Interface 0

To display interface specific information for PIM, use the show command described in the following example.

Router# show ipv6 pim interface

	Interface		PIM	Nbr	Hello	DR
				Count Intvl		Prior
	Null0		off	0	30	1
	Address: FE80::1
	DR	: not elected
	FastEthernet0/0		off	0	30	1
	Address: ::
	DR	: not elected
	GigabitEthernet0/8 off			0	30	1
	Address: ::
	DR	: not elected
	GigabitEthernet0/9 off			0	30	1
	Address: ::
	DR	: not elected
	Gi0/10		off	0	30	1
	Address: ::
	DR	: not elected
	Gi0/11		off	0	30	1
	Address: ::
	DR	: not elected
	GigabitEthernet0/0 off			0	30	1
	Address: ::
	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
42-14						OL-23826-09