Cisco Systems A9014CFD manual Configuring Direct On-Demand Operation on a Sender MEP, 11-19

Chapter 11 ITU-T Y.1731 Performance Monitoring

How to Configure IP SLAs Y.1731 On-Demand and Concurrent Operations

Max - *13:48:58.084 IST Tue Mar 19 2013

Backward

Number of Observations 19

Available indicators: 19

Unavailable indicators: 0

Tx frame count: 190

Rx frame count: 190

Min/Avg/Max - (FLR % ): 0:9/000.00%/0:9

Cumulative - (FLR % ): 000.0000%

Timestamps backward:

Min - *13:48:58.084 IST Tue Mar 19 2013

Max - *13:48:58.084 IST Tue Mar 19 2013

How to Configure IP SLAs Y.1731 On-Demand and Concurrent Operations

•Configuring Direct On-Demand Operation on a Sender MEP, page 11-19

•Configuring Referenced On-Demand Operation on a Sender MEP, page 11-20

•Configuring IP SLAs Y.1731 Concurrent Operation on a Sender MEP, page 11-21

Configuring Direct On-Demand Operation on a Sender MEP

Prerequisites

Class of Service (CoS)-level monitoring must be enabled on MEPs associated to the Ethernet frame loss operation using the monitor loss counter command on the devices at both ends of the operation.

Note Cisco IOS Y.1731 implementation allows monitoring of frame loss for frames on an EVC regardless of the CoS value (any CoS or Aggregate CoS cases).

SUMMARY STEPS

1.enable

2.ip sla on-demand ethernet slm domain domain-name{evc evc-idvlan vlan-id} {mpid target-mp-idmac-address target-address}cos cos {source {mpid source-mp-idmac-address source-address}} {continuous [interval milliseconds] burst [interval milliseconds] [number number-of-frames] [frequency seconds]} [size bytes] aggregation seconds {duration seconds max number-of-packets}

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09		11-19