2. Configure Receive CIR

Follow the on-screen messages to enter the following information. Questions below may or not display, depending on the options that you select.

Receive Committed Information Rate (CIR)

Committed burst size (Bc)

Circuit Throughput

Excess burst size (Be)

The PARTNER ACS 1600 DSL module displays a default or last-used value in parentheses to the left of the command prompt. To accept this value, press ENTER.

3. Configure FRF.12 Fragmentation

Displays the End-to-End Fragmentation Configuration submenu, which contains the following commands.

1. Enable/Disable End-to-End FRF.12

Enables and disables End-to-End FRF.12.

2. Set Fragmentation Size

Sets the maximum fragmentation size, a value between 100-1,600 bytes.

Type the fragmentation size, and then press ENTER.

The PARTNER ACS 1600 DSL module displays a default or last-used value in parentheses to the left of the command prompt. To accept this value, press ENTER.

Select your choice.

Avaya, Inc.

- 49 - PARTNER ACS 1600 DSL module User Guide

Page 50
Image 50
Avaya 1600 manual Configure Receive CIR, Set Fragmentation Size