Avaya 1600 manual Interworking Connections, Add Interworking Connection, Update Entire System

You must restart the PARTNER ACS 1600 DSL module to load the new version of ACOS. For more information on restarting the PARTNER ACS 1600 DSL module or on upgrading your software using TFTP, see the “PARTNER ACS 1600 DSL module basics” chapter.

X. Update Entire System

Uses TFTP to download files to update the IAD.

A. File Transfer Utilities

Displays the File Transfer Method submenu, which contains the following commands that download a file to the file system stored in Flash memory in the PARTNER ACS 1600 DSL module:

1. Receive via TFTP

2. Send or Receive via XMODEM

Select your choice.

I.Interworking Connections

Displays the Connections Menu, which contains the following commands. This menu only displays when an USI Interface is installed.

You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information the PARTNER ACS 1600 DSL module, see the “PARTNER ACS 1600 DSL module basics” chapter.

1. Add Interworking Connection

Follow the on-screen messages to create an interworking connection.

Questions below may or not display, depending on the options that you select.

•Type the number of the NIM with the datalink protocol = Frame Relay.

•Select the port to use.

•Type the number of the NIM with the datalink protocol = ATM.

•Select the port to use.

Avaya, Inc. - 63 - PARTNER ACS 1600 DSL module User Guide