Avaya 1600 manual System Utilities, Ping Utility, Trace Route

9.System Utilities

Displays the Utilities Menu, which contains the following submenus and commands that either upgrade the ACOS software or support ACOS application development.

Except for Ping Utility and Trace Route, these commands are only for application development, software upgrades or to restore factory defaults.

You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “PARTNER ACS 1600 DSL module basics” chapter.

P. Ping Utility

Uses the Ping protocol to check for the presence of a host on the Internet.

Type the following information, and then press ENTER:

•IP address or complete host name to Ping**

•Ping packet size

•Number of times to Ping

**You must enter the domain name with the host name. For example, mycomputer.mydomain.com.

The PARTNER ACS 1600 DSL module displays a default or last-used value in parentheses to the left of the command prompt. To accept this value, press ENTER.

T. Trace Route

Traces the route to a specific host.

Enter the IP address or host name** to trace, and then press

ENTER.

**You must enter the domain name with the host name. For example, mycomputer.mydomain.com.

The PARTNER ACS 1600 DSL module displays a default or last-used value in parentheses to the left of the command prompt. To accept this value, press ENTER.

Avaya, Inc. - 60 - PARTNER ACS 1600 DSL module User Guide