Avaya 1600 manual Configuring the NAT timeouts, Enter NAT Local Server Protocol 1=TCP 2=UDP

4.Type the new translated IP address (range = 1-65535), and then press ENTER.

The following instructions display on-screen:

Current NAT Local Server Translated IP Address = 0.0.0.0

Enter new NAT Local Server Standard IP address:

5.Type the new standard IP address (range = 1-65535), and then press ENTER.

The following instructions display on-screen:

Enter NAT Local Server Protocol (1=TCP 2=UDP):

6.Select the local server protocol, and then press any key. The NAT Configuration Menu displays.

You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter.

Configuring the NAT timeouts

Under normal circumstances, the timeout default setting is adequate. However, if you interact with multiple-player IP games or video conferencing, you need to configure the timeout.

The local server protocol that you select determines which timeout to configure. TDP and UDP are similar, except that TCP tracks TCP clients on a per-connection basis and removes them from the table as soon as the connection closes.

Avaya, Inc. - 154 - PARTNER ACS 1600 DSL module User Guide