Avaya, Inc. - 112 - PARTNER ACS 1600 DSL module User Guide

Deleting a PVC

To delete a PVC:
1. On the Main Menu, select Configure WAN, and then type
the slot number of the WAN interface that you want to
configure.
The WAN Configuration Menu displays.
2. Select Configure PVCs.
The ATM PVC Config Menu displays.
*****************************************
* ATM PVC Config Menu *
*****************************************
1. Add New PVC
2. Modify Existing PVC
3. Delete PVC
4. Show Current PVCs
3. Select Delete PVC.
4. Type the port number to delete, and then press ENTER.
5. Do one of the following:
To delete the PVC, type y.
To cancel the deletion, type n.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter.
Configuring
ATM options
The PARTNER ACS 1600 DSL module contains commands
that allow you to configure or display the following ATM
options:
Payload Scrambling
F4 OAM VPI
F4 OAM Type
F4 OAM Configuration
OAM Loopback
Empty Cells