Configuring the maintenance protocol, User, Both | Avaya 1600

Configuring the maintenance protocol

To configure the maintenance protocol:

1.On the Main Menu, select Configure WAN, and then type the slot number of the WAN interface that you want to configure.

The WAN Configuration Menu displays.

2.Select Configure FR Options.

The Frame Relay Options submenu displays.

*****************************************

*

Frame Relay Options

*

*****************************************

1.Configure Fragmentation

2.Configure Maintenance Protocol

3.Configure Congestion Parameters

3.Select Configure Maintenance Protocol.

The Frame Relay Maintenance Protocol submenu displays.

*****************************************

* Frame Relay Maintenance Protocol *

*****************************************

0.None

1.CCITT Q.933 Annex A Network

2.CCITT Q.933 Annex A User

3.CCITT Q.933 Annex A Both

4.ANSI T1.617 Annex D Network

5.ANSI T1.617 Annex D User

6.ANSI T1.617 Annex D Both

7.LMI Network (FRF.1.1)

8.	LMI	User	(FRF.1.1)
9.	LMI	Both	(FRF.1.1)

4.Type the number that corresponds to the protocol on your network, and then press ENTER.

You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter.

Avaya, Inc.

- 122 - PARTNER ACS 1600 DSL module User Guide

Image 123

Avaya 1600 manual Configuring the maintenance protocol, User, Both

Contents

PARTNER Table of contents Menu interface Avaya, Inc Iii Partner ACS 1600 DSL module User Guide Avaya, Inc Iv Partner ACS 1600 DSL module User Guide Avaya, Inc Partner ACS 1600 DSL module User Guide Administration WAN configuration Router configuration NAT configuration Glossary Connector pinoutsUSI Cables IP Filtering Organization of this guide Introduction Avaya, Inc Partner ACS 1600 DSL module User Guide Console cable ConnectorsPartner ACS 1600 DSL module basics Hardware and software requirements Front View Logging on Connecting None Using a terminal emulation programAccess Level User ID 19200 Configuring a port IP address Using a Telnet program Select Configure Port IP Address Running the Telnet program Enter a new subnet mask for this interface 255.255.255.0 Default valuesMenu interface Restarting Computer running Windows 95/98/Me/2000 Auto Log offExiting Verifying an IP address Partner ACS 1600 DSL module Select Display Current Configuration Main Menu Menu interface Reports Menu Display Current ConfigurationSpanning Tree bridge priority 1-65,535 default = 32,768 Simple Network Management Protocol Snmp enabled or disabled Frame Relay Management Snmp Trap Host IP Address IP address of the Snmp trap host Display Interface Statistics Display Network Statistics Display Media Statistics Clear a StatisticClear Frame Relay Dlci Statistics Clear Serial Statistics Display Route Table Display ARP TableDisplay Bridge forwarding database Display System Uptime Display PPP Authorization EntriesSpanning Tree Protocol STP enabled or disabled Display Bridge status Routing Configure IP Router Configure Port IP Address Unconfigure Port IP AddressAdd/Remove a Static Route Enable/Disable RIP Configure RIP Version by PortConfigure RIP Poisoned Reverse by Port Configure DNS Client Configure Dhcp ClientConfigure Dhcp Relay Display Dhcp Relay Statistics Configure Telnet Server PortConfigure IP Filtering Globally enable/disable input or output filters Toggle input or output type filters to view/edit Displays all filters of the type that you set with Source.ip.addr.high Filter Source IP High Address Display the filter in the copy buffer Show IP filtering statistics Edit the filter in the copy bufferDeletes the filter in the copy buffer Delete all filters of the chosen type Display Route Table Bridging Configure Bridge Enable/Disable Spanning Tree Globally Enable/Disable Bridging GloballyEnable/Disable Bridging by Port Configure Bridge Aging Timer Configure Spanning Tree Forward Delay Configure Spanning Tree Port PriorityConfigure Spanning Tree Hello Time Configure Spanning Tree Max Age Delete Bridge Forwarding Database Entry WAN Configure Configure Datalink Protocol Quick Configuration Externally provided MBps KBps Configure Physical InterfaceSet WAN interface type RS-530 Sdsl Mode Set Sdsl Sync Delay LucentSet Sdsl to AccessLan CPE Mode Set Sdsl Speed Manually Configure Dlcis Frame Relay Set Fragmentation Size Configure Receive CIR Modify Existing Dlci Add New PVC Configure Pvcs ATMDelete Dlci Show Current DLCIs Proprietary Voice RFC 2364 PPPoATM with LLC EncapsulationNone PAP Client PAP Server Chap Client Chap Server Modify Existing PVC RFC 2364 PPPoATM using VC Muxing Proprietary Voice Delete PVC Configure FR Options Frame RelayEnable/Disable FRF.12 Enable Automatic Fragment Sizing Set Manual Fragment Size Configure Transmit Congestion Parameters Configure Copper Mountain FragmentationEnable/Disable CuMtn Fragmentation Configure Congestion Parameters Configure ATM Options ATM Configure Receive Congestion ParametersConfigure EmptyCells Configure System Location Enable/Disable SnmpConfigure System Contact Configure System Name Configure Login System Utilities Ping UtilityTrace Route Set System Defaults Configure Console Baud RateConfigure Console Timeout Hard Reset or Reload Acos from Flash File Transfer Menu File Transfer Utilities Update Entire SystemInterworking Connections Add Interworking Connection Always Map FR Fecn to ATM Efci 1. Always Set FR-SSCS, ATM =True Always Always Map FR Fecn to ATM Efci Map FR DE to ATM Clpi Delete Interworking ConnectionPrint Interworking Connections Always Map FR Fecn to ATM Efci False Enable/Disable Dhcp Debug Messages Configure Dhcp ServerDefault Interworking Connections Enable/Disable Dhcp Configure Dhcp Client Entry Configure Dhcp Address Range Pool Display Dhcp Server Statistics Display Dhcp Configuration Delete a Dhcp Client Entry Nacks sent Requests for other servers Protocol errorsDisplay Dhcp Server Assigned Addresses Display Dhcp Entry Details Configure NAT UDP Timeout Enable/Disable NAT Debug MessagesEnable/Disable NAT Translation by Port Configure NAT TCP Timeout Display NAT Statistics Configure NAT Local Server Entry Delete IP Address from NAT Tables Display NAT Connection TableDisplay NAT Connection Details Display NAT Local Server Table Delete NAT Local Server Entry Enable/Disable Derived TimingEnable/Disable Derived Timing Debug Messages Derived Timing Hotline Test Ring Test On/Off Hook Test Diagnostics MenuPots Diagnostics Sdsl Diagnostics Command Line Interface Command line syntaxCommands VoicePath Configure Set Jitter DelaySet Voice Gateway Auto Control Mode Manual Control Mode Display Jitter DelaySet Slic Control Mode Set Compander Mode u-Law, a-Law Configure Echo Cancellation default setting per port Set Debug ModeConfigure Echo Cancellation Default Settings Enable Debug Disable Debug Debug MGCP/NCS Configure MGCP/NCS parametersManage MGCP/NCS Embedded Client Display MGCP/NCS statistics Debug Control ConfigureCopperCom Call Control Statistics Flags Payload CPE Signal GWY Signal Display Debug State/Flags Ring Test Call Control SettingsConfigure Ring Test Stats Display Set Trace data Display IAD StateTrace Display Parameters Set Client IP address Configure Tollbridge Voice ClientPrint Current Configuration Pick sound heard if insufficient WAN B/W to complete call Debugging options Security Administration Select Change User ID Changing the PasswordAccess level Menu access level Changing the User ID Configuring Select Change User Password or Change NetMan PasswordEnter new Password up to 17 characters Enabling/disabling Snmp Configuring the System ContactSnmp Configuration Menu displays Select Enable/Disable Snmp Configuring the System Name Select Configure System ContactSelect Configure System Name Configuring the System Location Select Configure Snmp Community Configuring the System Community Upgrading the system Configuring the Snmp Trap Host IP Address Using Tftp Configuring the Tftp Server Select Receive via Tftp Select Update Entire SystemSelect File Transfer Menu File Transfer Menu displays File Transfer Method Receive via Tftp Receive via Xmodem Using Telnet Verifying the downloadSelect File System Menu File System Menu displays Acos Upgrading Select File Transfer Menu File Transfer Menu displays Select Update Acos acos.bin Support Changing Datalink Protocol WAN configuration Configuring Physical Interface Available WAN Interfaces Configuring the Sdsl InterfaceWAN Configuration Menu displays Select Configure Physical Interface Configuring the USI interface Avaya, Inc Partner ACS 1600 DSL module User Guide Select Set WAN interface type Quick Configuration Select Quick Configuration Configuring ATM PVCs ATM Encapsulation Configuration submenu displays Adding a PVCSelect Add New PVC ATM Service Category Configuration CBR UBR Modifying a PVCSelect Modify Existing PVC ATM Encapsulation Configuration submenu displays Configuring ATM options Deleting a PVCSelect Delete PVC Configuring the F4 OAM Cell Configuring Payload Scrambling Sending OAM Loopback F4 OAM Type Configuration Menu None F4 End to end OAM Empty Cells are currently Idle Configuring Empty CellsSelect Configure EmptyCells Select Send OAM Loopback Select Add New Dlci Configuring Frame Relay DLCIsAdding a Dlci Enter 1 for Idle cells or 2 for Unassigned cells FR Encapsulation Configuration submenu displays Select Modify Existing Dlci Modifying a Dlci Deleting a Dlci Select Delete Dlci Configuring Frame Relay optionsConfiguring fragmentation WAN Configuration Menu displays Select Configure FR Options Do one of the following Configuring the maintenance protocol UserBoth Configuring the congestion parameters Enter number of ms to delay Configuring the voice pathSetting the jitter delay Select Set Jitter Delay Configuring Echo Cancellation Setting the Slic Control Mode Display current Echo Cancellation default settings Avaya, Inc Partner ACS 1600 DSL module User Guide Configuring an IP address Router configuration Router Configuration Menu displays Enabling RIP poisoned reverse Router Configuration Menu redisplays Enabling RIP poisoned reverse globally Enabling RIP poisoned reverse by port Setting the RIP version Avaya, Inc Partner ACS 1600 DSL module User Guide Select Add a Static Route Adding a static route Router Modification Menu redisplays Adding a default route Disabling bridging globally Select Add/Change the Default RouteBridge Configuration Menu displays Disabling bridging Bridge Configuration Menu Configure Spanning Tree Bridge PriorityDisabling bridging by port Disabling STP globally Disabling STP Disabling STP by port Bridge Configuration Menu redisplays Bridge configuration Enabling bridging globally Enabling Bridging Enabling bridging by port Enter Bridge Aging time in seconds 1..3600 Setting the bridge aging timer Disabling RIP poisoned reverse globally Disabling RIP poisoned reverse Disabling RIP poisoned reverse by port Router Configuration Menu resplays Enabling STP globally Enabling STP Enabling STP by port Bridge Configuration Menu redisplays NAT configuration NAT Configuration Menu displays NAT Configuration Menu redisplaysEnabling NAT translation Enter NAT Local Server Entry to Configure 1..10 Configuring the NAT local server entry Enter NAT Local Server Protocol 1=TCP 2=UDP Configuring the NAT timeouts Configuring a NAT TCP timeout Select Configure NAT TCP TimeoutEnter NAT TCP Connection Timeout in seconds 60..3600 Configuring a NAT UDP timeout Select Configure NAT UDP TimeoutEnter NAT UDP Connection Timeout in seconds 60..3600 Configuring the NAT port range Select Configure NAT Port Range Enter Low End of NAT Port Range 5000..65534Enter High End of NAT Port Range 5010..65534 Dhcp server configuration Dhcp Server Configuration Menu displaysEnabling Configuring the Dhcp server parameters Select Enable/Disable DhcpDelete a Dhcp Assignment Entry Type the new gateway IP address, and then press Dhcp Server Configuration Menu redisplays NetBIOS Type Configuration Menu displays Configuring Dhcp address range pool Avaya, Inc Partner ACS 1600 DSL module User Guide Power-up test VerificationOperational test Maintenance Displaying the current configuration Menu hierarchy Display Current Configuration Display Network Statistics Configure IP Router Configure Telnet Server Port Configure IP Filtering Configure Dhcp Client Configure Dhcp Relay Totally Transparent Raw Hdlc Cisco compatible Hdlc USI Configure DLCIs Datalink Protocol = Frame Relay Configure PVCs Datalink Protocol = ATM Avaya, Inc Partner ACS 1600 DSL module User Guide Avaya, Inc Partner ACS 1600 DSL module User Guide Configure FR Options Datalink Protocol = Frame Relay Change User ID Change User Password Change NetMan Password Configure ATM Options Datalink Protocol = ATM Ping Utility Trace Route Configure Console Baud Rate Interworking Connections Always Map Fr Fecn To ATM Efci Map Fr De To ATM Clpi Hotline Test Ring Test Set Jitter Delay Display Jitter Delay Set Slic Control Mode Command Line Interface VoicePath Configure Display Statistics C. Clear Statistics Display IAD State Trace Stats Display Ring Test Protocols Partner ACS 1600 DSL module specificationsNetwork Interfaces Bridging Routing Environmental Management and Configuration Pin Signal Connector pinouts10BaseT Connector 100BaseT Connector Connector USI Cables DTE or DCE?Which Hardware Protocol? Signal RS-530 RS-449 Signal RS-530 IP Filtering Glossary Inverse ARP Icmp OSI Reference MAC address Subnet Mask PoisonedReverse Router SVC Index Partner ACS Avaya, Inc Partner ACS 1600 DSL module User Guide Avaya, Inc Partner ACS 1600 DSL module User Guide Partner ACS Avaya, Inc Partner ACS 1600 DSL module User Guide Eeprom Avaya, Inc Partner ACS 1600 DSL module User Guide Avaya, Inc Partner ACS 1600 DSL module User Guide Avaya, Inc Partner ACS 1600 DSL module User Guide Avaya, Inc Partner ACS 1600 DSL module User Guide STP Telnet Avaya, Inc Partner ACS 1600 DSL module User Guide