0. Quick Configuration

Displays the Quick Configuration submenu, which contains the following commands to quickly configure the NetEngine PARTNER ACS 1600 DSL module .

1.Lucent Stinger (Conexant Autobaud, Payload Scrambling)

2.Nokia (Auto Cycle)

3.Copper Mountain (Auto Sense)

4.Paradyne (Framed 784Kbps, Payload Scrambling)

5.AccessLan CPE

6.Nortel IMAS

7.ATM (Unframed, 1152Kpbs fixed)

8.Frame Relay (784Kpbs fixed)

Select your choice.

The PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “PARTNER ACS 1600 DSL module basics” chapter.

1. Configure Datalink Protocol

Displays the WAN Datalink Protocol Configuration Menu, which contains the following commands to set the data link control protocol for the active interface.

1.Lucent Stinger (Conexant Autobaud, Payload Scrambling)

2.Nokia (Auto Cycle)

3.Copper Mountain (Auto Sense)

4.Paradyne (Framed 784Kbps, Payload Scrambling)

5.AccessLan CPE

6.ATM

7.Frame Relay

Select your choice.

The IAD automatically restarts.

Your settings display in the Display Current Configuration command in the Reports Menu. For more information, see "Reports Menu" earlier in this chapter.

Avaya, Inc.

- 45 - PARTNER ACS 1600 DSL module User Guide

Page 46
Image 46
Avaya 1600 manual Quick Configuration, Configure Datalink Protocol