Avaya 1600 manual Payload CPE Signal GWY Signal Display Debug State/Flags

•Payload

•CPE Signal

•GWY Signal

D. Display Debug State/Flags

Displays the following information about the active debug state and flags:

•Debugging – ENABLED or DISABLED.

•Flags:

oGlobals (DT/PCHES) o T10 & T11 Timeouts o WAN Signaling

o WAN Input Ready o POTS Input Ready o POTS Hook State

C.Control Debug (Enable/Disable) Enables and disables debugging.

S. Set Debug Flags

Sets values for the following debug flags:

•Globals (DT/PCHES)

•T10 & T11 Timeouts

•WAN Signaling

•WAN Input Ready

•POTS Input Ready

•POTS Hook State

The PARTNER ACS 1600 DSL module displays a default or last-used value in parentheses to the left of the command prompt. To accept this value, press ENTER.

Your settings display in the D. Display Debug State/Flags command.

Select your choice.

Avaya, Inc. - 81 - PARTNER ACS 1600 DSL module User Guide