2.Select Enable/Disable Spanning Tree by Port. The following instructions display on-screen:

Available Interfaces :

1.SDSL

2.10/100BaseT Ethernet

3.Universal Serial

0.(Abort)

Selection :

Interfaces may or may not display, depending on the IAD in use.

3.Type the number of the port for which you want to disable STP, and then type D.

The Bridge Configuration Menu redisplays.

4.Repeat steps 1-3 for each port on which you want to disable STP.

You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter.

Avaya, Inc.

- 141 - PARTNER ACS 1600 DSL module User Guide

Page 142
Image 142
Avaya 1600 manual Bridge Configuration Menu redisplays