Manage MGCP/NCS Embedded Client, Debug MGCP/NCS | Avaya 1600

M.Manage

MGCP/NCS Embedded Client

Displays the MGCP/NCS Management Menu, which contains the following submenus and commands.

C. Configure MGCP/NCS parameters

Sets the MGCP/NCS parameters. Type the following information, and then press ENTER:

•Default IP address for Notified Entity

•IP address to use for MGCP signaling (Data) packets

•Type of Service (TOS) field value for the IP header of the outbound signaling packets

•IP address to use for RTP Transport (Voice) packets

•TOS field value for the IP header of the outbound RTP Transport packets

S.Display MGCP/NCS statistics

Displays the Endpoint (line) and connection statistics. If no calls are active, only whether or not the Endpoint is currently connected to its Notified Entity displays.

D. Debug MGCP/NCS

Displays the MGCP Debug menu, which contains the following commands.

1.Disable all msgs

2.Enable Informational msgs

3.Enable Verbose msgs

Select your choice.

R. Remove a connection

Removes LOST connections. Type the number of the Connection ID to delete, and then press ENTER.

Avaya, Inc.

- 79 - PARTNER ACS 1600 DSL module User Guide

Image 80

Avaya 1600 Manage MGCP/NCS Embedded Client, Configure MGCP/NCS parameters, Display MGCP/NCS statistics, Debug MGCP/NCS

Contents

PARTNER Table of contents Menu interface Avaya, Inc Iii Partner ACS 1600 DSL module User Guide Avaya, Inc Iv Partner ACS 1600 DSL module User Guide Avaya, Inc Partner ACS 1600 DSL module User Guide Administration WAN configuration Router configuration NAT configuration Connector pinouts USI CablesIP Filtering Glossary Introduction Organization of this guide Avaya, Inc Partner ACS 1600 DSL module User Guide Connectors Partner ACS 1600 DSL module basicsHardware and software requirements Console cable Front View Connecting Logging on Using a terminal emulation program Access Level User ID19200 None Using a Telnet program Configuring a port IP address Select Configure Port IP Address Running the Telnet program Default values Menu interfaceRestarting Enter a new subnet mask for this interface 255.255.255.0 Auto Log off ExitingVerifying an IP address Computer running Windows 95/98/Me/2000 Select Display Current Configuration Partner ACS 1600 DSL module Menu interface Main Menu Display Current Configuration Spanning Tree bridge priority 1-65,535 default = 32,768Simple Network Management Protocol Snmp enabled or disabled Reports Menu Snmp Trap Host IP Address IP address of the Snmp trap host Frame Relay Management Display Network Statistics Display Interface Statistics Clear Frame Relay Dlci Statistics Clear Serial Statistics Display Media StatisticsClear a Statistic Display Bridge forwarding database Display Route TableDisplay ARP Table Display PPP Authorization Entries Spanning Tree Protocol STP enabled or disabledDisplay Bridge status Display System Uptime Configure IP Router Routing Add/Remove a Static Route Configure Port IP AddressUnconfigure Port IP Address Configure RIP Poisoned Reverse by Port Enable/Disable RIPConfigure RIP Version by Port Configure Dhcp Relay Configure DNS ClientConfigure Dhcp Client Configure Telnet Server Port Configure IP FilteringGlobally enable/disable input or output filters Display Dhcp Relay Statistics Toggle input or output type filters to view/edit Displays all filters of the type that you set with Display the filter in the copy buffer Source.ip.addr.high Filter Source IP High Address Edit the filter in the copy buffer Deletes the filter in the copy bufferDelete all filters of the chosen type Show IP filtering statistics Display Route Table Configure Bridge Bridging Enable/Disable Bridging Globally Enable/Disable Bridging by PortConfigure Bridge Aging Timer Enable/Disable Spanning Tree Globally Configure Spanning Tree Port Priority Configure Spanning Tree Hello TimeConfigure Spanning Tree Max Age Configure Spanning Tree Forward Delay Delete Bridge Forwarding Database Entry Configure WAN Quick Configuration Configure Datalink Protocol Configure Physical Interface Set WAN interface typeRS-530 Externally provided MBps KBps Set Sdsl to AccessLan CPE Mode Set Sdsl Speed Manually Sdsl ModeSet Sdsl Sync Delay Lucent Configure Dlcis Frame Relay Configure Receive CIR Set Fragmentation Size Modify Existing Dlci Configure Pvcs ATM Delete DlciShow Current DLCIs Add New PVC None PAP Client PAP Server Chap Client Chap Server Proprietary VoiceRFC 2364 PPPoATM with LLC Encapsulation RFC 2364 PPPoATM using VC Muxing Modify Existing PVC Proprietary Voice Configure FR Options Frame Relay Enable/Disable FRF.12Enable Automatic Fragment Sizing Set Manual Fragment Size Delete PVC Configure Copper Mountain Fragmentation Enable/Disable CuMtn FragmentationConfigure Congestion Parameters Configure Transmit Congestion Parameters Configure EmptyCells Configure ATM Options ATMConfigure Receive Congestion Parameters Enable/Disable Snmp Configure System ContactConfigure System Name Configure System Location Configure Login Trace Route System UtilitiesPing Utility Configure Console Baud Rate Configure Console TimeoutHard Reset or Reload Acos from Flash Set System Defaults File Transfer Menu Update Entire System Interworking ConnectionsAdd Interworking Connection File Transfer Utilities Set FR-SSCS, ATM = TrueAlways Always Map FR Fecn to ATM Efci 1. Always Delete Interworking Connection Print Interworking ConnectionsAlways Map FR Fecn to ATM Efci False Always Map FR Fecn to ATM Efci Map FR DE to ATM Clpi Configure Dhcp Server Default Interworking ConnectionsEnable/Disable Dhcp Enable/Disable Dhcp Debug Messages Configure Dhcp Address Range Pool Configure Dhcp Client Entry Display Dhcp Configuration Display Dhcp Server Statistics Nacks sent Requests for other servers Protocol errors Display Dhcp Server Assigned AddressesDisplay Dhcp Entry Details Delete a Dhcp Client Entry Enable/Disable NAT Debug Messages Enable/Disable NAT Translation by PortConfigure NAT TCP Timeout Configure NAT UDP Timeout Configure NAT Local Server Entry Display NAT Statistics Display NAT Connection Table Display NAT Connection DetailsDisplay NAT Local Server Table Delete IP Address from NAT Tables Enable/Disable Derived Timing Enable/Disable Derived Timing Debug MessagesDerived Timing Delete NAT Local Server Entry Diagnostics Menu Pots DiagnosticsSdsl Diagnostics Hotline Test Ring Test On/Off Hook Test Commands Command Line InterfaceCommand line syntax Set Voice Gateway VoicePath ConfigureSet Jitter Delay Display Jitter Delay Set Slic Control ModeSet Compander Mode u-Law, a-Law Auto Control Mode Manual Control Mode Set Debug Mode Configure Echo Cancellation Default SettingsEnable Debug Disable Debug Configure Echo Cancellation default setting per port Configure MGCP/NCS parameters Manage MGCP/NCS Embedded ClientDisplay MGCP/NCS statistics Debug MGCP/NCS Configure CopperCom Call ControlStatistics Debug Control Payload CPE Signal GWY Signal Display Debug State/Flags Flags Call Control Settings Configure Ring TestStats Display Ring Test Display IAD State TraceDisplay Parameters Set Trace data Configure Tollbridge Voice Client Print Current ConfigurationPick sound heard if insufficient WAN B/W to complete call Set Client IP address Debugging options Administration Security Changing the Password Access level Menu access levelChanging the User ID Select Change User ID Enter new Password up to 17 characters ConfiguringSelect Change User Password or Change NetMan Password Configuring the System Contact Snmp Configuration Menu displaysSelect Enable/Disable Snmp Enabling/disabling Snmp Select Configure System Name Configuring the System NameSelect Configure System Contact Configuring the System Location Configuring the System Community Select Configure Snmp Community Configuring the Snmp Trap Host IP Address Upgrading the system Configuring the Tftp Server Using Tftp Select Update Entire System Select File Transfer Menu File Transfer Menu displaysFile Transfer Method Receive via Tftp Receive via Xmodem Select Receive via Tftp Select File System Menu File System Menu displays Using TelnetVerifying the download Upgrading Acos Select File Transfer Menu File Transfer Menu displays Select Update Acos acos.bin Support WAN configuration Changing Datalink Protocol Configuring Physical Interface Configuring the Sdsl Interface WAN Configuration Menu displaysSelect Configure Physical Interface Available WAN Interfaces Configuring the USI interface Avaya, Inc Partner ACS 1600 DSL module User Guide Select Set WAN interface type Quick Configuration Configuring ATM PVCs Select Quick Configuration Select Add New PVC ATM Encapsulation Configuration submenu displaysAdding a PVC Select Modify Existing PVC ATM Service Category Configuration CBR UBRModifying a PVC ATM Encapsulation Configuration submenu displays Select Delete PVC Configuring ATM optionsDeleting a PVC Configuring Payload Scrambling Configuring the F4 OAM Cell F4 OAM Type Configuration Menu None F4 End to end OAM Sending OAM Loopback Configuring Empty Cells Select Configure EmptyCellsSelect Send OAM Loopback Empty Cells are currently Idle Configuring Frame Relay DLCIs Adding a DlciEnter 1 for Idle cells or 2 for Unassigned cells Select Add New Dlci FR Encapsulation Configuration submenu displays Modifying a Dlci Select Modify Existing Dlci Deleting a Dlci Configuring Frame Relay options Configuring fragmentationWAN Configuration Menu displays Select Configure FR Options Select Delete Dlci Do one of the following Both Configuring the maintenance protocolUser Configuring the congestion parameters Configuring the voice path Setting the jitter delaySelect Set Jitter Delay Enter number of ms to delay Setting the Slic Control Mode Configuring Echo Cancellation Display current Echo Cancellation default settings Avaya, Inc Partner ACS 1600 DSL module User Guide Router configuration Configuring an IP address Router Configuration Menu displays Router Configuration Menu redisplays Enabling RIP poisoned reverse Enabling RIP poisoned reverse globally Enabling RIP poisoned reverse by port Setting the RIP version Avaya, Inc Partner ACS 1600 DSL module User Guide Adding a static route Select Add a Static Route Adding a default route Router Modification Menu redisplays Select Add/Change the Default Route Bridge Configuration Menu displaysDisabling bridging Disabling bridging globally Disabling bridging by port Bridge Configuration MenuConfigure Spanning Tree Bridge Priority Disabling STP Disabling STP globally Disabling STP by port Bridge Configuration Menu redisplays Bridge configuration Enabling Bridging Enabling bridging globally Enabling bridging by port Setting the bridge aging timer Enter Bridge Aging time in seconds 1..3600 Disabling RIP poisoned reverse Disabling RIP poisoned reverse globally Router Configuration Menu resplays Disabling RIP poisoned reverse by port Enabling STP Enabling STP globally Enabling STP by port Bridge Configuration Menu redisplays NAT configuration Enabling NAT translation NAT Configuration Menu displaysNAT Configuration Menu redisplays Configuring the NAT local server entry Enter NAT Local Server Entry to Configure 1..10 Configuring the NAT timeouts Enter NAT Local Server Protocol 1=TCP 2=UDP Enter NAT TCP Connection Timeout in seconds 60..3600 Configuring a NAT TCP timeoutSelect Configure NAT TCP Timeout Enter NAT UDP Connection Timeout in seconds 60..3600 Configuring a NAT UDP timeoutSelect Configure NAT UDP Timeout Configuring the NAT port range Enter High End of NAT Port Range 5010..65534 Select Configure NAT Port RangeEnter Low End of NAT Port Range 5000..65534 Enabling Dhcp server configurationDhcp Server Configuration Menu displays Delete a Dhcp Assignment Entry Configuring the Dhcp server parametersSelect Enable/Disable Dhcp Type the new gateway IP address, and then press NetBIOS Type Configuration Menu displays Dhcp Server Configuration Menu redisplays Configuring Dhcp address range pool Avaya, Inc Partner ACS 1600 DSL module User Guide Operational test Power-up testVerification Maintenance Displaying the current configuration Display Current Configuration Display Network Statistics Menu hierarchy Configure IP Router Configure Dhcp Client Configure Dhcp Relay Configure Telnet Server Port Configure IP Filtering Totally Transparent Raw Hdlc Cisco compatible Hdlc USI Configure DLCIs Datalink Protocol = Frame Relay Configure PVCs Datalink Protocol = ATM Avaya, Inc Partner ACS 1600 DSL module User Guide Avaya, Inc Partner ACS 1600 DSL module User Guide Configure FR Options Datalink Protocol = Frame Relay Configure ATM Options Datalink Protocol = ATM Change User ID Change User Password Change NetMan Password Ping Utility Trace Route Configure Console Baud Rate Interworking Connections Always Map Fr Fecn To ATM Efci Map Fr De To ATM Clpi Hotline Test Ring Test Command Line Interface VoicePath Configure Set Jitter Delay Display Jitter Delay Set Slic Control Mode Display Statistics C. Clear Statistics Stats Display Ring Test Display IAD State Trace Partner ACS 1600 DSL module specifications Network InterfacesBridging Routing Protocols Management and Configuration Environmental Connector pinouts 10BaseT Connector100BaseT Connector Pin Signal Connector Which Hardware Protocol? USI CablesDTE or DCE? Signal RS-530 RS-449 Signal RS-530 IP Filtering Glossary Icmp Inverse ARP MAC address OSI Reference Poisoned ReverseRouter Subnet Mask SVC Index Partner ACS Avaya, Inc Partner ACS 1600 DSL module User Guide Avaya, Inc Partner ACS 1600 DSL module User Guide Partner ACS Avaya, Inc Partner ACS 1600 DSL module User Guide Eeprom Avaya, Inc Partner ACS 1600 DSL module User Guide Avaya, Inc Partner ACS 1600 DSL module User Guide Avaya, Inc Partner ACS 1600 DSL module User Guide Avaya, Inc Partner ACS 1600 DSL module User Guide STP Telnet Avaya, Inc Partner ACS 1600 DSL module User Guide