Avaya 1600 manual Setting the RIP version, Router Configuration Menu redisplays

4.Type E.

The Router Configuration Menu redisplays.

5.Repeat steps 1-3 for each port for which you want to enable RIP poisoned reverse.

You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter.

Setting the RIP version

To set the RIP version:

1.On the Main Menu, select Configure IP Router.

The Router Configuration Menu displays.

*****************************************

* Router Configuration Menu *

*****************************************

C. Configure Port IP Address

U. Unconfigure Port IP Address

S. Add/Remove a Static Route

R. Enable/Disable RIP

V. Configure RIP Version by Port

P. Configure RIP Poisoned Reverse by Port N. Configure DNS Client

H. Configure DHCP Client

L. Configure DHCP Relay

T. Configure Telnet Server Port

F. Configure IP Filtering

D. Display Route Table

2.Select Configure RIP Version by Port. The following instructions display on-screen:

Available Interfaces :

1.SDSL

2.10/100BaseT Ethernet

3.Universal Serial

0.(Abort)

Selection :

Interfaces may or may not display, depending on the IAD in use.

Avaya, Inc. - 133 - PARTNER ACS 1600 DSL module User Guide