Avaya 1600 Configure Port IP Address, Unconfigure Port IP Address, Add/Remove a Static Route

C. Configure Port IP Address

Sets the IP address and subnet mask for the selected interface.

Type the number of the Interface, the number of the port or connection to configure, and then enter the following:

•New IP address

•New subnet mask

•Priority

The PARTNER ACS 1600 DSL module displays a default or last-used value in parentheses to the left of the command prompt. To accept this value, press ENTER.

U. Unconfigure Port IP Address

Deletes the IP address of the selected interface. Type the number of the port to unconfigure, confirm, and then press

ENTER.

S. Add/Remove a Static Route

Displays the Router Modification Menu, which contains the following commands:

A. Add a Static Route

Creates a static route and adds it to the Route Table.

Type the following information for the route you want to add, and then press ENTER:

•Destination (IP) address

•Network mask

•Gateway

The PARTNER ACS 1600 DSL module displays a default or last-used value in parentheses to the left of the command prompt. To accept this value, press ENTER.

R. Remove a Route

Deletes a static route from the Route Table. Type the IP address of the route to remove, and then press

ENTER.

F. Add/Change Default Route

Creates or changes the default static route, and then adds it to the Route Table. Type the Gateway address for the default route, and then press ENTER.

Avaya, Inc. - 31 - PARTNER ACS 1600 DSL module User Guide