Avaya 1600 manual Command Line Interface, Command line syntax, Commands

C.Command Line Interface

For future implementation.

Displays the command line interface, which supports the following syntax and commands.

Command line syntax

The command syntax is:

COMMAND <required parameters> (optional parameters)

For example:

Set wan ip address 192.3.4.5 255.255.255.0 2 0 0 1

The required parameters are the ip address <192.3.4.5> and the netmask <255.255.255.0>.

The optional parameters are the slot (2), interface(0), port(0) and connection(2).

The command and its parameters are NOT case sensitive.

Commands

The following are the commands that are currently supported:

exit – quits the command line interface and returns to the menu system.

quit – quits the command line interface and returns to the menu system.

set ip route <IPRoute> <netmask> <IPGatewayAddress> - sets a static IP route.

set ip default route <DefautltIPaddress> - sets the default IP address.

set wan ip address <IPaddress> <netmask> (slot) (interface) (port) (connection) – sets the WAN IP address. If you do not enter any optional parameters, it finds the first available slot, interface, port and connection.

set lan ip address <IPaddress> <netmask> (slot) (interface) (port) (connection) – sets the LAN IP address. If you do not enter any optional parameters, it finds the first available slot, interface, port and connection.

set wan datalink <framerelay or atm> (slot) (interface) (port) – sets the datalink protocol to Frame Relay or ATM. . If you do not enter any optional parameters, it finds the first available slot, interface and port.

set wan framerelay dlci <dlci number> <1490 or 1483> (slot) (interface) (port) – sets the Frame Relay

Avaya, Inc. - 75 - PARTNER ACS 1600 DSL module User Guide