D. Display Parameters

Displays the following information about the Ring Test:

Port

On hook time

Off hook time

S.Start Ring Test Starts the Ring test.

T.Stop Ring Test Stops the Ring test.

Select your choice.

S. Display IAD State

Displays the on hook state for each port.

T. Trace

Displays Trace Settings submenu, which contains the following commands:

S. Set Trace data

Sets all Trace data.

Type the following information, and then press ENTER:

L2 Module

Cc Module

Mg Module

L2 Subscriber

Cc Subscriber

Cc Port (16 total)

The PARTNER ACS 1600 DSL module displays a default or last-used value in parentheses to the left of the command prompt. To accept this value, press ENTER.

Your settings display in the Display Trace data command.

D. Display Trace data

Displays the following Trace data:

L2 Module

Cc Module

Mg Module

L2 Subscriber

Cc Subscriber

Avaya, Inc.

- 83 - PARTNER ACS 1600 DSL module User Guide

Page 84
Image 84
Avaya 1600 manual Display IAD State, Display Parameters, Set Trace data, Display Trace data