Avaya, Inc. - 137 - PARTNER ACS 1600 DSL module User Guide
T. Remove the Default Route
D. Display Route Table
3. Select Add/Change the Default Route.
4. Type the gateway address for the default route, press
ENTER, and then type Y.
The Router Modification Menu displays.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter.
Disablingbridging
To configure the PARTNER ACS 1600 DSL module as a
router, you must disable bridging both globally and by port.
The order in which you perform the procedures is irrelevant.
When you disable bridging globally, it automatically disables
bridging for all ports and disables the spanning tree protocol.

Disabling bridging globally

To disable bridging globally:
1. On the Main Menu, select Configure Bridge.
The Bridge Configuration Menu displays.
*****************************************
* Bridge Configuration Menu *
*****************************************
G. Enable/Disable Bridging Globally
P. Enable/Disable Bridging by Port
A. Configure Bridge Aging Timer
T. Enable/Disable Spanning Tree Globally
O. Enable/Disable Spanning Tree by Port
R. Configure Spanning Tree Bridge
Priority
Q. Configure Spanning Tree Port Priority
H. Configure Spanning Tree Hello Time
S. Configure Spanning Tree Max Age
F. Configure Spanning Tree Forward Delay