Avaya 1600 - page 48

Avaya, Inc. - 47 - PARTNER ACS 1600 DSL module User Guide
SDSL Mode
Displays SDSL Configuration submenu, which contains the
following commands to set the SDSL mode or speed.
The PARTNER ACS 1600 DSL module displays a default or
last-used value in parentheses to the left of the command
prompt. To accept this value, press ENTER.
1. Toggle SDSL Mode (CO or CPE)
2. Set SDSL Speed to Auto Cycle (Nokia)
Displays the Auto Cycle First Speed Option
submenu, which contains the following commands to
set the initial speed.
1. 1536 Kbps
2. 1152 Kbps
3. 768 Kbps
4. 384 Kbps
5. 192 Kbps
Select your choice.
3. Set SDSL Speed to Auto Sense (Copper
Mountain)
4. Enable/Disable Conexant AutoBaud Mode
Enables and disables the Conexant AutoBaud rate
adaptation mode.
5. Set SDSL Sync Delay (Lucent)
Sets the SDSL sync delay. Follow the on-screen
messages to disable AutoBaud. You must disable
AutoBaud to set the SDSL sync delay.
6. Set SDSL to AccessLan CPE Mode
7. Set SDSL Speed Manually
Sets the SDSL speed, a value between 144-2,320
Kbps. Type the SDSL data rate value, and then press
ENTER.
8. Restart SDSL Activation Sequence
9. SDSL Interface Mode (Bit Order)
A. Enable/Disable SDSL AutoBaud Debug
Messages
Enables and disables the display of SDSL AutoBaud
debugging messages. Select to enable. Select a
second time to disable.