Avaya, Inc. - 34 - PARTNER ACS 1600 DSL module User Guide
S. Display DHCP Relay Statistics
Displays the following information about the DHCP
Relay:
• DHCP client requests forwarded to DHCP server
• DHCP client requests dropped
• Server responses forwarded to DHCP clients
• Server responses dropped
• Unknown server responses
• Server requests timed out
T. Configure Telnet Server Port
Sets the port for the Telnet Server (default = 23).
Type the number of the port, and then press ENTER.
The PARTNER ACS 1600 DSL module displays a default or
last-used value in parentheses to the left of the command
prompt. To accept this value, press ENTER.
F. Configure IP Filtering
Displays the IP Filtering Configuration Menu, which
contains the following submenu and commands to configure
IP filtering. For more information, see the "IP Filtering"
appendix.
P. Choose port for IP filtering
Sets the port on which to use IP filtering.
Type the number of the interface, the number of the
port (if applicable), and then press ENTER.
F. Globally enable/disable input or output filters
Enables and disables the input and output filters for all
installed interfaces.
You must globally enable the filters for the associated
filtering to work.
Follow the on-screen instructions to enable or disable
both the input and output filters globally.