Avaya 1600 manual Configure DNS Client, Configure Dhcp Client, Configure Dhcp Relay

N. Configure DNS Client

Displays the DNS Client Menu, which contains the following commands to configure the Domain Name Server (DNS) client:

A. Set DNS Server IP Address

Sets the IP address of the DNS Server. Type the DNS Server IP address, and then press ENTER.

T. Set DNS Server Timeout

Sets the DNS Server Timeout, a value between 5 - 20 seconds (default = 5 seconds). Type the DNS Server Timeout value, and then press ENTER.

S. Display DNS Cache and Statistics

Displays information about the data in the DNS cache.

H. Configure DHCP Client

Enables and disables the Dynamic Host Configuration Protocol (DHCP) client for the selected Interface. Type the number of the Interface, the number of the port, and then enable or disable.

L. Configure DHCP Relay

Displays the DHCP Relay Menu, which contains the following commands to configure the DHCP Relay:

E. Enable/Disable DHCP Relay

Enables and disables the DHCP Relay.

When you enable the DHCP Relay, you must also enter a new DHCP server IP address. Type the DHCP Server IP address, and then press ENTER.

The PARTNER ACS 1600 DSL module displays a default or last-used value in parentheses to the left of the command prompt. To accept this value, press

ENTER.

C. Configure DHCP Relay

Sets the DHCP server IP address. Type the DHCP Server IP address, and then press ENTER.

The PARTNER ACS 1600 DSL module displays a default or last-used value in parentheses to the left of the command prompt. To accept this value, press

ENTER.

Avaya, Inc. - 33 - PARTNER ACS 1600 DSL module User Guide