Avaya 1600 manual Maintenance

To test the PARTNER ACS 1600 DSL module:

1.Verify the WAN link status.

2.Pick up the telephone receiver on the PARTNER phone and check for a dial tone

If no dial tone is present, troubleshoot as necessary.

3.Repeat steps 2-3 for each provisioned line.

4.Disconnect the telephone once you are through testing the analog telephone ports.

5.Use a crossover cable to connect the PC to the Ethernet LAN port on the PARTNER ACS 1600 DSL module.

6.Ping a known good address on the PARTNER ACS 1600 DSL module, and then wait for acknowledgement.

If a timeout occurs, troubleshoot the LAN path to the PARTNER ACS 1600 DSL module as necessary.

7.Ping a known good address on the network, and then wait for acknowledgement.

If a timeout occurs, troubleshoot the LAN path to the PARTNER ACS 1600 DSL module as necessary.

8.Disconnect the PC from the Ethernet LAN port.

9.Use a straight-through cable to connect the Ethernet LAN port to your local LAN patch panel or hub.

10.Connect the PARTNER ACS 1600 DSL module telephone ports to the local distribution frame or patch panel.

The PARTNER ACS 1600 DSL module is ready for service.

Maintenance

The PARTNER ACS 1600 DSL module Menu interface contains built-in utilities for maintenance and development.

Before running the System Utilities, contact your local Authorized Dealer or call the Avaya Help Line at (800) 628 2888. Consultation charges may apply.

Avaya, Inc. - 166 - PARTNER ACS 1600 DSL module User Guide