Avaya 1600 Configure FR Options Frame Relay, Delete PVC, Show Current PVCs, Enable/Disable FRF.12

Displays the ATM Service Category Configuration submenu, which contains the following commands to set the service category:

1.CBR

2.UBR

Select your choice, and then follow the on- screen messages to set the PCR value.

7. RFC 2364 (PPPoATM using VC Muxing)

Displays the ATM Service Category Configuration submenu, which contains the following commands to set the service category:

1.CBR

2.UBR

Select your choice, and then follow the on-screen messages to set the PCR value.

3. Delete PVC

Type the number of the port to delete, and then press ENTER.

4. Show Current PVCs

Displays statistical information about the active PVC values on per port basis.

You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “PARTNER ACS 1600 DSL module basics” chapter.

4. Configure FR Options (Frame Relay)

Displays the Frame Relay Options submenu, which contains the following commands to set the Frame Relay options

1. Configure Fragmentation

Displays the FR Fragmentation Configuration submenu, which contains the following commands to configure fragmentation.

1. Configure FRF.12 Fragmentation

Displays the FR FRF.12 Configuration submenu, which contains the following commands.

1. Enable/Disable FRF.12

Enables and disables FRF.12 fragmentation.

2.Enable Automatic Fragment Sizing

3.Set Manual Fragment Size

Sets the maximum fragment size, a value between 0-50 ms or 100-1600 bytes.

Type the fragment size, and then press ENTER.

Avaya, Inc. - 55 - PARTNER ACS 1600 DSL module User Guide