Avaya, Inc. - 67 - PARTNER ACS 1600 DSL module User Guide
The NetBIOS Type Configuration Menu displays, which
contains the following commands to set the NetBIOS node
type:
1. B-node
2. P-node
4. M-node
8. H-node
Select your choice.
The PARTNER ACS 1600 DSL module displays a default or
last-used value in parentheses to the left of the command
prompt. To accept this value, press ENTER.
Your settings display in the Display DHCP Configuration
command.
P. Configure DHCP Address Range Pool
Sets the DHCP IP address range.
Type the high IP address, the low IP address, and then press
ENTER. Both IP addresses must be on the same Subnet
mask.
The PARTNER ACS 1600 DSL module displays a default or
last-used value in parentheses to the left of the command
prompt. To accept this value, press ENTER.
C. Configure DHCP Client Entry
Assigns the same IP address every time to the client that you
enter.
Type the following information, and then press ENTER:
• Client entry number
• DHCP Client MAC address (enter value without
colons)
• Host Name
• Lease Time
• IP Address
• Subnet Mask
• Default Gateway
• DNS Server
Your settings display in the Display DHCP Entry Details
command.