Frame Relay Management | Avaya 1600 instruction

enabled and the SNMP Community Name is null, SNMP goes into read-only mode.

•SNMP Trap Host IP Address - IP address of the SNMP trap host.

•Telnet Server Port - port number of the Telnet server.

•DNS Server IP Address – IP address of the DNS Server.

•DNS Server Timeout

•Application Information - loaded program files.

•Support File Information - loaded support files.

•Interface type – enabled or disabled.

oElectrical Interface – WAN interface type: RS-530 or v.35.

oRIP - enabled or disabled.

oPoisoned Reverse - enabled or disabled.

oDynamic Host Configuration Protocol (DHCP) Client – enabled or disabled.

oBridging - enabled or disabled.

oSpanning Tree - enabled or disabled. o Port Priority - 0-255 (default = 128).

o Path Cost - 1-65,535 (default = 32,768).

o DataLink Protocol - Totally Transparent, Raw HDLC, Cisco compatible HDLC, IP-Plus compatible HDLC, PPP (over Raw HDLC), ATM or Frame Relay.

o SDSL Mode - Customer Premises Equipment (CPE) or Central Office (CO). For development purposes only.

oLine Rate - Auto, Fixed, 1152 Kbps, 768 Kbps, 384 Kbps, 192 Kbps, 2320 Kbps or manually set.

oPPP Auth Type – None, PAP Client, PAP Server, CHAP Client or CHAP Server.

oUserid – PAP User ID.

oPassword – PPP password. o Peer Name

o Frame Relay Management

oDLCI – RAW (No Encapsulation), Proprietary Voice DLCI, RFC 1490 or ATM RFC 1483 (Tunneling).

oVPI/VCI – RAW (AAL5), RAW (AAL0), Proprietary Voice, RFC 1483 (using VC Muxing), RFC 1483 (with LLC Encapsulation), RFC 2364 (PPPoATM with LLC Encapsulation) or RFC 2364 (PPPoATM using VC Muxing).

Avaya, Inc.

- 25 - PARTNER ACS 1600 DSL module User Guide

Image 26

Avaya 1600 manual Snmp Trap Host IP Address IP address of the Snmp trap host, Frame Relay Management

Contents

PARTNER Table of contents Menu interface Avaya, Inc Iii Partner ACS 1600 DSL module User Guide Avaya, Inc Iv Partner ACS 1600 DSL module User Guide Avaya, Inc Partner ACS 1600 DSL module User Guide Administration WAN configuration Router configuration NAT configuration IP Filtering Connector pinoutsUSI Cables Glossary Introduction Organization of this guide Avaya, Inc Partner ACS 1600 DSL module User Guide Hardware and software requirements ConnectorsPartner ACS 1600 DSL module basics Console cable Front View Connecting Logging on 19200 Using a terminal emulation programAccess Level User ID None Using a Telnet program Configuring a port IP address Select Configure Port IP Address Running the Telnet program Restarting Default valuesMenu interface Enter a new subnet mask for this interface 255.255.255.0 Verifying an IP address Auto Log offExiting Computer running Windows 95/98/Me/2000 Select Display Current Configuration Partner ACS 1600 DSL module Menu interface Main Menu Simple Network Management Protocol Snmp enabled or disabled Display Current ConfigurationSpanning Tree bridge priority 1-65,535 default = 32,768 Reports Menu Snmp Trap Host IP Address IP address of the Snmp trap host Frame Relay Management Display Network Statistics Display Interface Statistics Clear Frame Relay Dlci Statistics Clear Serial Statistics Display Media StatisticsClear a Statistic Display Bridge forwarding database Display Route TableDisplay ARP Table Display Bridge status Display PPP Authorization EntriesSpanning Tree Protocol STP enabled or disabled Display System Uptime Configure IP Router Routing Add/Remove a Static Route Configure Port IP AddressUnconfigure Port IP Address Configure RIP Poisoned Reverse by Port Enable/Disable RIPConfigure RIP Version by Port Configure Dhcp Relay Configure DNS ClientConfigure Dhcp Client Globally enable/disable input or output filters Configure Telnet Server PortConfigure IP Filtering Display Dhcp Relay Statistics Toggle input or output type filters to view/edit Displays all filters of the type that you set with Display the filter in the copy buffer Source.ip.addr.high Filter Source IP High Address Delete all filters of the chosen type Edit the filter in the copy bufferDeletes the filter in the copy buffer Show IP filtering statistics Display Route Table Configure Bridge Bridging Configure Bridge Aging Timer Enable/Disable Bridging GloballyEnable/Disable Bridging by Port Enable/Disable Spanning Tree Globally Configure Spanning Tree Max Age Configure Spanning Tree Port PriorityConfigure Spanning Tree Hello Time Configure Spanning Tree Forward Delay Delete Bridge Forwarding Database Entry Configure WAN Quick Configuration Configure Datalink Protocol RS-530 Configure Physical InterfaceSet WAN interface type Externally provided MBps KBps Set Sdsl to AccessLan CPE Mode Set Sdsl Speed Manually Sdsl ModeSet Sdsl Sync Delay Lucent Configure Dlcis Frame Relay Configure Receive CIR Set Fragmentation Size Modify Existing Dlci Show Current DLCIs Configure Pvcs ATMDelete Dlci Add New PVC None PAP Client PAP Server Chap Client Chap Server Proprietary VoiceRFC 2364 PPPoATM with LLC Encapsulation RFC 2364 PPPoATM using VC Muxing Modify Existing PVC Proprietary Voice Enable Automatic Fragment Sizing Set Manual Fragment Size Configure FR Options Frame RelayEnable/Disable FRF.12 Delete PVC Configure Congestion Parameters Configure Copper Mountain FragmentationEnable/Disable CuMtn Fragmentation Configure Transmit Congestion Parameters Configure EmptyCells Configure ATM Options ATMConfigure Receive Congestion Parameters Configure System Name Enable/Disable SnmpConfigure System Contact Configure System Location Configure Login Trace Route System UtilitiesPing Utility Hard Reset or Reload Acos from Flash Configure Console Baud RateConfigure Console Timeout Set System Defaults File Transfer Menu Add Interworking Connection Update Entire SystemInterworking Connections File Transfer Utilities Always Set FR-SSCS, ATM =True Always Map FR Fecn to ATM Efci 1. Always Always Map FR Fecn to ATM Efci False Delete Interworking ConnectionPrint Interworking Connections Always Map FR Fecn to ATM Efci Map FR DE to ATM Clpi Enable/Disable Dhcp Configure Dhcp ServerDefault Interworking Connections Enable/Disable Dhcp Debug Messages Configure Dhcp Address Range Pool Configure Dhcp Client Entry Display Dhcp Configuration Display Dhcp Server Statistics Display Dhcp Entry Details Nacks sent Requests for other servers Protocol errorsDisplay Dhcp Server Assigned Addresses Delete a Dhcp Client Entry Configure NAT TCP Timeout Enable/Disable NAT Debug MessagesEnable/Disable NAT Translation by Port Configure NAT UDP Timeout Configure NAT Local Server Entry Display NAT Statistics Display NAT Local Server Table Display NAT Connection TableDisplay NAT Connection Details Delete IP Address from NAT Tables Derived Timing Enable/Disable Derived TimingEnable/Disable Derived Timing Debug Messages Delete NAT Local Server Entry Sdsl Diagnostics Diagnostics MenuPots Diagnostics Hotline Test Ring Test On/Off Hook Test Commands Command Line InterfaceCommand line syntax Set Voice Gateway VoicePath ConfigureSet Jitter Delay Set Compander Mode u-Law, a-Law Display Jitter DelaySet Slic Control Mode Auto Control Mode Manual Control Mode Enable Debug Disable Debug Set Debug ModeConfigure Echo Cancellation Default Settings Configure Echo Cancellation default setting per port Display MGCP/NCS statistics Configure MGCP/NCS parametersManage MGCP/NCS Embedded Client Debug MGCP/NCS Statistics ConfigureCopperCom Call Control Debug Control Payload CPE Signal GWY Signal Display Debug State/Flags Flags Stats Display Call Control SettingsConfigure Ring Test Ring Test Display Parameters Display IAD StateTrace Set Trace data Pick sound heard if insufficient WAN B/W to complete call Configure Tollbridge Voice ClientPrint Current Configuration Set Client IP address Debugging options Administration Security Changing the User ID Changing the PasswordAccess level Menu access level Select Change User ID Enter new Password up to 17 characters ConfiguringSelect Change User Password or Change NetMan Password Select Enable/Disable Snmp Configuring the System ContactSnmp Configuration Menu displays Enabling/disabling Snmp Select Configure System Name Configuring the System NameSelect Configure System Contact Configuring the System Location Configuring the System Community Select Configure Snmp Community Configuring the Snmp Trap Host IP Address Upgrading the system Configuring the Tftp Server Using Tftp File Transfer Method Receive via Tftp Receive via Xmodem Select Update Entire SystemSelect File Transfer Menu File Transfer Menu displays Select Receive via Tftp Select File System Menu File System Menu displays Using TelnetVerifying the download Upgrading Acos Select File Transfer Menu File Transfer Menu displays Select Update Acos acos.bin Support WAN configuration Changing Datalink Protocol Configuring Physical Interface Select Configure Physical Interface Configuring the Sdsl InterfaceWAN Configuration Menu displays Available WAN Interfaces Configuring the USI interface Avaya, Inc Partner ACS 1600 DSL module User Guide Select Set WAN interface type Quick Configuration Configuring ATM PVCs Select Quick Configuration Select Add New PVC ATM Encapsulation Configuration submenu displaysAdding a PVC Select Modify Existing PVC ATM Service Category Configuration CBR UBRModifying a PVC ATM Encapsulation Configuration submenu displays Select Delete PVC Configuring ATM optionsDeleting a PVC Configuring Payload Scrambling Configuring the F4 OAM Cell F4 OAM Type Configuration Menu None F4 End to end OAM Sending OAM Loopback Select Send OAM Loopback Configuring Empty CellsSelect Configure EmptyCells Empty Cells are currently Idle Enter 1 for Idle cells or 2 for Unassigned cells Configuring Frame Relay DLCIsAdding a Dlci Select Add New Dlci FR Encapsulation Configuration submenu displays Modifying a Dlci Select Modify Existing Dlci Deleting a Dlci WAN Configuration Menu displays Select Configure FR Options Configuring Frame Relay optionsConfiguring fragmentation Select Delete Dlci Do one of the following Both Configuring the maintenance protocolUser Configuring the congestion parameters Select Set Jitter Delay Configuring the voice pathSetting the jitter delay Enter number of ms to delay Setting the Slic Control Mode Configuring Echo Cancellation Display current Echo Cancellation default settings Avaya, Inc Partner ACS 1600 DSL module User Guide Router configuration Configuring an IP address Router Configuration Menu displays Router Configuration Menu redisplays Enabling RIP poisoned reverse Enabling RIP poisoned reverse globally Enabling RIP poisoned reverse by port Setting the RIP version Avaya, Inc Partner ACS 1600 DSL module User Guide Adding a static route Select Add a Static Route Adding a default route Router Modification Menu redisplays Disabling bridging Select Add/Change the Default RouteBridge Configuration Menu displays Disabling bridging globally Disabling bridging by port Bridge Configuration MenuConfigure Spanning Tree Bridge Priority Disabling STP Disabling STP globally Disabling STP by port Bridge Configuration Menu redisplays Bridge configuration Enabling Bridging Enabling bridging globally Enabling bridging by port Setting the bridge aging timer Enter Bridge Aging time in seconds 1..3600 Disabling RIP poisoned reverse Disabling RIP poisoned reverse globally Router Configuration Menu resplays Disabling RIP poisoned reverse by port Enabling STP Enabling STP globally Enabling STP by port Bridge Configuration Menu redisplays NAT configuration Enabling NAT translation NAT Configuration Menu displaysNAT Configuration Menu redisplays Configuring the NAT local server entry Enter NAT Local Server Entry to Configure 1..10 Configuring the NAT timeouts Enter NAT Local Server Protocol 1=TCP 2=UDP Enter NAT TCP Connection Timeout in seconds 60..3600 Configuring a NAT TCP timeoutSelect Configure NAT TCP Timeout Enter NAT UDP Connection Timeout in seconds 60..3600 Configuring a NAT UDP timeoutSelect Configure NAT UDP Timeout Configuring the NAT port range Enter High End of NAT Port Range 5010..65534 Select Configure NAT Port RangeEnter Low End of NAT Port Range 5000..65534 Enabling Dhcp server configurationDhcp Server Configuration Menu displays Delete a Dhcp Assignment Entry Configuring the Dhcp server parametersSelect Enable/Disable Dhcp Type the new gateway IP address, and then press NetBIOS Type Configuration Menu displays Dhcp Server Configuration Menu redisplays Configuring Dhcp address range pool Avaya, Inc Partner ACS 1600 DSL module User Guide Operational test Power-up testVerification Maintenance Displaying the current configuration Display Current Configuration Display Network Statistics Menu hierarchy Configure IP Router Configure Dhcp Client Configure Dhcp Relay Configure Telnet Server Port Configure IP Filtering Totally Transparent Raw Hdlc Cisco compatible Hdlc USI Configure DLCIs Datalink Protocol = Frame Relay Configure PVCs Datalink Protocol = ATM Avaya, Inc Partner ACS 1600 DSL module User Guide Avaya, Inc Partner ACS 1600 DSL module User Guide Configure FR Options Datalink Protocol = Frame Relay Configure ATM Options Datalink Protocol = ATM Change User ID Change User Password Change NetMan Password Ping Utility Trace Route Configure Console Baud Rate Interworking Connections Always Map Fr Fecn To ATM Efci Map Fr De To ATM Clpi Hotline Test Ring Test Command Line Interface VoicePath Configure Set Jitter Delay Display Jitter Delay Set Slic Control Mode Display Statistics C. Clear Statistics Stats Display Ring Test Display IAD State Trace Bridging Routing Partner ACS 1600 DSL module specificationsNetwork Interfaces Protocols Management and Configuration Environmental 100BaseT Connector Connector pinouts10BaseT Connector Pin Signal Connector Which Hardware Protocol? USI CablesDTE or DCE? Signal RS-530 RS-449 Signal RS-530 IP Filtering Glossary Icmp Inverse ARP MAC address OSI Reference Router PoisonedReverse Subnet Mask SVC Index Partner ACS Avaya, Inc Partner ACS 1600 DSL module User Guide Avaya, Inc Partner ACS 1600 DSL module User Guide Partner ACS Avaya, Inc Partner ACS 1600 DSL module User Guide Eeprom Avaya, Inc Partner ACS 1600 DSL module User Guide Avaya, Inc Partner ACS 1600 DSL module User Guide Avaya, Inc Partner ACS 1600 DSL module User Guide Avaya, Inc Partner ACS 1600 DSL module User Guide STP Telnet Avaya, Inc Partner ACS 1600 DSL module User Guide