Cambridge SoundWorks FPS2000 Volume Control, If your Sound Blaster Live! sound

Connection To Sound Blaster Live! Via DIGITAL DIN

If your Sound Blaster Live! sound	2. Insert the other end of the SPDIF			• On the Configuration tabbed
card includes a Digital I/O card,	cable into the DIGITAL DIN input			page, select the “4 Speakers”
you can take advantage of the	on the subwoofer (see diagram K).			option.
clear, distortion-free audio	3. Use the following procedure to			• A sofa icon (representing you)
available from its Digital DIN	configure the Sound Blaster Live!			appears in the center of the
output.	sound card for four speakers:			Preview box, with four speakers
1. Insert one end of the SPDIF cable	• Bring your mouse pointer to the			at the corners of the box.
into the DIGITAL DIN output jack	top of the monitor screen to			Note: The FPS2000 Digital will
on the Sound Blaster Live!	display the Creative Launcher.			detect the presence of a plug
Digital I/O card. The position of	• Click on AudioHQ.			connected to the DIGITAL DIN
the Digital DIN connector on the	• Click on the Speaker tab. The			input and give the DIGITAL DIN
Digital I/O card may be different	speaker dialog box will appear.			input priority. Any signal present
from this diagram. The Digital				at the AUDIO input will be
DIN connector is			DIGITAL	ignored. Be sure to remove the
the only connector with			DIN	plug from the DIGITAL DIN input
a 9-pin configuration.				if you wish to listen to a sound
Digital DIN Connector		DIGITAL I/O CARD		source through the analog AUDIO
				INPUT.
		SPDIF CABLE

Volume Control

The FPS2000 Digital system comes with a separate wired Volume Control, designed to be positioned close at hand and affixed with the semipermanent mounting strip.

Connect the circular plug at the end of the Volume Control into the circular Volume Control jack on the back of the subwoofer (see diagram L).

K

L	FRONT
	REAR

FPS2000 Digital Subwoofer

8

FPS2000 Rev.C 12 4/17/00, 4:10 PM