E. Edit the filter in the copy buffer

Edits the filter in the copy buffer.

Follow the on-screen messages to enter the following information:

Filter state – Idle or Active

Filter action – Pass or Discard

Filter protocol – IP, ICMP, IGMP, TCP,

UDP

Filter Source IP Low Address

Filter Source IP High Address

Filter Source Port Low – TCP or UDP packets only

Filter Source Port High - TCP or UDP packets only

Filter Destination IP Low Address

Filter Destination IP High Address

Filter Destination Port Low

Filter Destination Port High

The PARTNER ACS 1600 DSL module displays a default or last-used value in parentheses to the left of the command prompt. To accept this value, press ENTER.

X. Deletes the filter in the copy buffer

Deletes the filter in the copy buffer.

X. Delete one filter of the chosen type

Deletes the filter that you select from the copy buffer. Type the number of the filter to delete and then press

ENTER.

Z. Delete all filters of the chosen type

Deletes all filters in the copy buffer.

S. Show IP filtering statistics

Displays the total number of input and output data packets filtered.

Y. Clear IP filtering statistics

Deletes all data from the Show IP filtering statistics command.

Avaya, Inc.

- 38 - PARTNER ACS 1600 DSL module User Guide

Page 39
Image 39
Avaya 1600 manual Edit the filter in the copy buffer, Deletes the filter in the copy buffer, Show IP filtering statistics