Avaya, Inc. - 35 - PARTNER ACS 1600 DSL module User Guide
T. Toggle input or output type filters to view/edit
Switches between the input and output filter types.
The filter type that you set here determines what
displays when you select any of the following
commands:
• Display all filters of the chosen type
• Insert a new or buffered filter of the chosen
type
• Append a new or buffered filter to the end of
the list
• Edit filter of the chosen type
• Copy filter operations menu
• Delete one filter of the chosen type
• Delete all filters of the chosen type
D. Display all filters of the chosen type
Displays all filters of the type set with the Toggle input
or output type filters to view/edit command.
I. Insert a new or buffered filter of the chosen type
Adds a new filter of the type set with the Toggle input
or output type filters to view/edit command
anywhere in the list that displays when you select
Display all filters of the chosen type.
Type the number of the filter before which you want to
insert the new filter, and then follow the on-screen
messages to enter the following information:
• Filter state – Idle or Active
• Filter action – Pass or Discard
• Filter protocol – IP, ICMP, IGMP, TCP, UDP
• Filter Source IP Low Address
• Filter Source IP High Address
• Filter Source Port Low
• Filter Source Port High
• Filter Destination IP Low Address
• Filter Destination IP High Address
• Filter Destination Port Low
• Filter Destination Port High
The PARTNER ACS 1600 DSL module displays a
default or last-used value in parentheses to the left of
the command prompt. To accept this value, press
ENTER.