Avaya, Inc. - 114 - PARTNER ACS 1600 DSL module User Guide
2. Select Configure ATM Options.
The ATM Configuration Menu displays.
*****************************************
* ATM Configuration Menu *
*****************************************
1. Configure Payload Scrambling
2. Configure F4 OAM VPI
3. Configure F4 OAM Type
4. Display F4 OAM Configuration
5. Send OAM Loopback
6. Configure EmptyCells
3. Select Configure F4 OAM VPI, and then type the VPI.
This value must match one of the WAN PVCS. For more
information, see the “Configuring PVCs” section earlier in
this chapter.
The ATM Configuration Menu redisplays.
4. Select Configure F4 OAM Type.
The F4 OAM Type Configuration Menu displays.
*******************************************
* F4 OAM Type Configuration Menu *
*******************************************
0. None
4. F4 End to end OAM
5. Select your choice.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter.
Sending OAM Loopback
To send an OAM Loopback:
1. On the Main Menu, select Configure WAN, and then type
the slot number of the WAN interface that you want to
configure.
The WAN Configuration Menu displays.