A. Append a new or buffered filter to the end of the list

Adds a new filter of the type set with the Toggle input or output type filters to view/edit command to the end of list that displays when you select Display all filters of the chosen type.

Type Y, and then follow the on-screen messages to enter the following information:

Filter state – Idle or Active

Filter action – Pass or Discard

Filter protocol – IP, ICMP, IGMP, TCP, UDP

Filter Source IP Low Address

Filter Source IP High Address

Filter Source Port Low

Filter Source Port High

Filter Destination IP Low Address

Filter Destination IP High Address

Filter Destination Port Low

Filter Destination Port High

The PARTNER ACS 1600 DSL module displays a default or last-used value in parentheses to the left of the command prompt. To accept this value, press

ENTER.

E. Edit filter of the chosen type

Displays all filters of the type that you set with the

Toggle input or output type filters to view/edit command that you can edit.

Type the number of the filter to edit, and then follow the on-screen messages to enter the following information:

Filter state – Idle or Active

Filter action – Pass or Discard

Filter protocol – IP, ICMP, IGMP, TCP, UDP

Filter Source IP Low Address

Filter Source IP High Address

Filter Source Port Low – TCP or UDP packets only

Filter Source Port High - TCP or UDP packets only

Filter Destination IP Low Address

Filter Destination IP High Address

Filter Destination Port Low

Avaya, Inc.

- 36 - PARTNER ACS 1600 DSL module User Guide

Page 37
Image 37
Avaya 1600 manual Displays all filters of the type that you set with