AT&T AT3111-2 user manual Troubleshooting, •Wait a few minutes

Appendix

Troubleshooting

•Disconnect the cordless handset battery, and spare battery, if applicable.

•Wait a few minutes.

•Connect power to the telephone base.

•Re-install the battery, and place the cordless handset into the telephone base.

•Wait for the cordless handset to re-establish its connection with the telephone base. Allow up to one minute for this to take place.

Incomplete	•	If a caller leaves a very long message, part of it may
messages		be lost when the system disconnects the call after four
		minutes.
	•	If the caller pauses for more than seven seconds, the
		system stops recording and disconnects the call.
	•	If the system’s memory becomes full during a message,
		the system stops recording and disconnects the call.
	•	If the caller's voice is very soft, the system may stop
		recording and disconnects the call.
System does	•	Make sure you subscribe to caller ID with call waiting
not receive		features services provided by your local telephone
caller ID when		company. Caller ID features will work only if both you
on a call		and the caller are in areas offering caller ID service, and
		if both telephone companies use compatible equipment.
Difficulty	•	Press VOLUME to increase speaker volume.
hearing
messages

44