AT&T AT3111-2 user manual Handset settings, Ringer volume, Ringer tone

<RINGER VOLUME RINGER TONE

RINGER VOLUME

Telephone operation

Handset settings

Ringer volume

The ringer volume can be adjusted either by the volume control on the right side of the handset, or in the handset menu.

To change the ringer volume:

1.With the handset idle, press the volume button

VOL or VOL to display the current volume level on the screen.

2.Press VOL or VOL to choose the desired volume level. When finished, the new volume level will be saved.

-OR-

1.Press MENU/SELECT from the idle mode.

2.Press CID or to select >RINGER VOLUME, then press MENU/SELECT.

3.Press CID or to adjust the volume. A sample of each ringer volume will be played when scrolling through the choices.

4.Press MENU/SELECT to save and you will hear a confirmation tone.

NOTE:

1.Ringer will be off if the volume is set to zero, and the will be displayed.

2.The ringer volume level also determines the ringer levels of intercom calls (pages 18-20) and the paging tone when initiating the handset locator feature (page 13). If the handset ringer volume level is set to off, that handset is silenced for all incoming calls and paging.

Ringer tone

This feature allows you to choose from ten ringer tones.

To choose a ringer tone:

1. Press MENU/SELECT from the idle mode.